emulate
Local API emulation for CI and no-network sandboxes
Safety scan
A static text scan, not a guarantee. Select the badge to see what was scanned and every finding.
Check it deeper on your machine
It has changed since its scan on 11 Nov 2026.
As a Claude Code plugin, install it and then ask Claude Code:
/plugin marketplace add keithmackay/mackayi/plugin install scanskillsafety@mackayiDo a deep scan of https://github.com/vercel-labs/emulate with scanskillsafety
Or from a terminal, clone it and run it:
git clone https://github.com/keithmackay/scanskillsafety-skill ~/.claude/skills/scanskillsafetynode ~/.claude/skills/scanskillsafety/cli.cjs --deep 'https://github.com/vercel-labs/emulate'
It checks the exact commit: every file, its packages against OSV (api.osv.dev), how it compares with this page's scan (findsafeskills.com receives the repository's address), and, if you agree, Claude reading every file with your own Claude subscription. It never runs the code.
Badge for your README
Markdown
[](/listings/vercel-labs--emulate)HTML
<a href="/listings/vercel-labs--emulate"><img src="/api/listings/vercel-labs--emulate/badge.svg" alt="findsafeskills safety rating" /></a>Install
Install instructions from the README
As written by the repo's author. findsafeskills has not verified these steps.
npx emulate
All services listen on IPv4 loopback (`127.0.0.1`) by default. No config file needed:
- **Vercel** on `http://localhost:4000` - **GitHub** on `http://localhost:4001` - **Google** on `http://localhost:4002` - **Slack** on `http://localhost:4003` - **Apple** on `http://localhost:4004` - **Microsoft** on `http://localhost:4005` - **Okta** on `http://localhost:4006` - **AWS** on `http://localhost:4007` - **Resend** on `http://localhost:4008` - **Stripe** on `http://localhost:4009` - **MongoDB Atlas** on `http://localhost:4010` - **Clerk** on `http://localhost:4011` - **Linear** on `http://localhost:4012` - **Twilio** on `http://localhost:4013`
Stripe webhooks configured with a secret include a `Stripe-Signature` header signed over the timestamp and raw request body.
Slack event callbacks use `X-Slack-Request-Timestamp` and `X-Slack-Signature` when `slack.signing_secret` is configured. The signature is an HMAC-SHA256 over `v0:<timestamp>:<raw-body>`; configure the receiver with the same secret and verify against the unparsed request body. Existing event subscriptions remain unsigned when the secret is absent or empty.
Resend `POST /emails` and `POST /emails/batch` support 24-hour `Idempotency-Key` replay, returning the original email IDs without duplicate emails or webhooks.
What was scanned
The files the safety scan read, as written by the repository's author and shown as plain text. Lines with a finding are marked.
README.md · README · 1,941 lines
View this file on GitHub (read at the repository's current version: the scan did not record which commit it read)
This file has changed since it was scanned, so this is not exactly the text that was scanned, and no line is marked. The findings are listed with the safety scan above.
- # emulate
- <p>
- <a href="https://vercel.com/labs#active-experiments"><img alt="Vercel Labs Experiment" src="https://img.shields.io/badge/LABS-EXPERIMENT-0a0a0a.svg?style=for-the-badge&logo=Vercel&labelColor=000000" height="28"></a>
- <a href="https://www.npmjs.com/package/emulate"><img alt="npm version: emulate" src="https://img.shields.io/npm/v/emulate.svg?style=for-the-badge&labelColor=000000" height="28"></a>
- <a href="https://github.com/vercel-labs/emulate/blob/main/LICENSE"><img alt="License: Apache-2.0" src="https://img.shields.io/github/license/vercel-labs/emulate.svg?style=for-the-badge&labelColor=000000" height="28"></a>
- <a href="https://www.npmjs.com/package/emulate"><img alt="npm downloads per month: emulate" src="https://img.shields.io/npm/dm/emulate.svg?style=for-the-badge&labelColor=000000&label=npm%20downloads" height="28"></a>
- </p>
- Local drop-in replacement services for CI and no-network sandboxes. Fully stateful, production-fidelity API emulation. Not mocks.
- ## Quick Start
- ```bash
- npx emulate
- ```
- All services listen on IPv4 loopback (`127.0.0.1`) by default. No config file needed:
- - **Vercel** on `http://localhost:4000`
- - **GitHub** on `http://localhost:4001`
- - **Google** on `http://localhost:4002`
- - **Slack** on `http://localhost:4003`
- - **Apple** on `http://localhost:4004`
- - **Microsoft** on `http://localhost:4005`
- - **Okta** on `http://localhost:4006`
- - **AWS** on `http://localhost:4007`
- - **Resend** on `http://localhost:4008`
- - **Stripe** on `http://localhost:4009`
- - **MongoDB Atlas** on `http://localhost:4010`
- - **Clerk** on `http://localhost:4011`
- - **Linear** on `http://localhost:4012`
- - **Twilio** on `http://localhost:4013`
- - **AI** on `http://localhost:4014`
- Stripe webhooks configured with a secret include a `Stripe-Signature` header signed over the timestamp and raw request body.
- Slack event callbacks use `X-Slack-Request-Timestamp` and `X-Slack-Signature` when `slack.signing_secret` is configured. The signature is an HMAC-SHA256 over `v0:<timestamp>:<raw-body>`; configure the receiver with the same secret and verify against the unparsed request body. Existing event subscriptions remain unsigned when the secret is absent or empty.
- Resend `POST /emails` and `POST /emails/batch` support 24-hour `Idempotency-Key` replay, returning the original email IDs without duplicate emails or webhooks. Optional `resend.allowlist` restrictions let tests reject recipients while `resend.send_attempts` records accepted and rejected sends.
- The AI service answers OpenAI Responses, Chat Completions, and Anthropic Messages requests with deterministic, rule-driven replies, so apps using the `openai` SDK, the Anthropic SDK, the Vercel AI SDK, or an OpenAI-compatible gateway can be tested offline without keys. It covers text, streaming, structured output, tool loops, reasoning, refusals, stored responses, errors, disconnects, and stalls.
- ## Custom emulators
- Build and share emulators for the third-party HTTP APIs your app uses. Define a provider's behavior in TypeScript, run it alongside built-in services, and reuse it in tests and framework adapters. emulate provides seeds, resets, persistence, and request/state inspection.
- Start from a working scaffold and adapt its routes and state to your provider:
- ```bash
- npm install -D emulate
- npx emulate init --custom inventory
- npx emulate start --watch
- ```
- The scaffold implements reservations, stock changes, cancellation, and out-of-stock errors. It creates a runnable Node test and adds the service to a discovered YAML, JSON, TypeScript, or JavaScript config. For an unusual executable config, it prints the import and service entry to add manually. `init` prints the test command and directs you to the service URL and Inspector link printed by `start`; the port depends on the config. Watch mode retries when a missing local import is created, including outside the config directory. Use the inspector to view requests and state or reset to the initial seed. Structured inspection redacts token and secret fields such as `access_token`, `refresh_token`, and `client_secret`.
- ```typescript
- import { defineEmulator, createEmulator } from 'emulate'
- const acme = defineEmulator({
- name: 'acme',
- state: () => ({ anvils: 100 }),
- setup({ app, state }) {
- app.get('/inventory', (c) => c.json(state))
- app.post('/orders', (c) => {
- if (!state.anvils) return c.json({ error: 'sold_out' }, 409)
- state.anvils -= 1
- return c.json({ shipped: 'anvil', to: 'coyote' }, 201)
- })
- },
- })
- const api = await createEmulator({ service: acme, listen: false })
- try {
- await api.request('/orders', { method: 'POST' })
- const checkpoint = api.snapshot()
- await api.reset()
- await api.restore(checkpoint)
- } finally {
- await api.close()
- }
- ```
- Use `defineConfig({ services: { acme: { emulator: acme }, github: { emulator: 'github' } } })` in `emulate.config.ts`. YAML/JSON entries accept local module paths and installed packages. `--config` selects a config explicitly; legacy flat configs and `--seed` remain supported. Node loads local TypeScript with path aliases and source locations without additional runtime dependencies. Node 26 supports erasable TypeScript only; compile enums and parameter properties to JavaScript before loading them. Node 24 also supports native TypeScript transforms.
- Custom state uses your own record shapes and IDs. Seeds replace the complete initial state. Reset restores the captured seed; successful watch reloads create a new baseline and reset the run. With config auto-discovery, watch mode also detects recognized config files created after startup. Instances are independent. Persistence is opt-in, with versioned snapshots and no cross-process locking. Use `port: 0` for HTTP tests, or `listen: false` to test without opening a port. Custom reset and close are awaitable. Framework adapters keep root-relative custom redirects under the service mount while preserving custom HTML bodies.
- Streamed responses persist state changes when their bodies finish or are canceled. Reset and close cancel active streams before running cleanup. `c.header('Set-Cookie', value, { append: true })` retains cookies already set on the response. In a Next.js route, export `OPTIONS` from `createEmulateHandler` to forward preflight requests and custom OPTIONS handlers.
- See the [custom emulator guide](https://emulate.dev/docs/custom-emulators) and [complete inventory example](examples/custom-api) for validation, middleware, persistence, adapters, package sharing, and troubleshooting.
- ## CLI
- ```bash
- # Start all services (zero-config)
- npx emulate
- # Start specific services
- npx emulate --service vercel,github
- # Custom port
- npx emulate --port 3000
- # Use a seed config file
- npx emulate --seed config.yaml
- # Generate omitted service secrets into a private file
- npx emulate start --seed config.yaml --generated-secrets-file .emulate-secrets.json
- # Generate a starter config
- npx emulate init
- # Generate config for a specific service
- npx emulate init --service vercel
- # List available services
- npx emulate list
- ```
- ### Options
- | Flag | Default | Description |
- |------|---------|-------------|
- | `-p, --port` | `4000` | Base port (auto-increments per service) |
- | `--host` | `127.0.0.1` | Listening address; use `0.0.0.0` to allow network access |
- | `-s, --service` | all | Comma-separated services to enable |
- | `--seed` | auto-detect | Path to seed config (YAML or JSON) |
- | `--base-url` | none | Override advertised base URL (supports `{service}` template) |
- | `--portless` | off | Serve over HTTPS via portless (auto-registers aliases) |
- | `--generated-secrets-file` | none | Generate omitted service secrets and write them to a new owner-only JSON file |
- The port can also be set via `EMULATE_PORT` or `PORT` environment variables.
- For access from a container or another machine, use `npx emulate start --host 0.0.0.0`. Set `--base-url` to a URL reachable by those clients when using OAuth redirects or other advertised URLs.
- To control a local emulator from an MCP client, run `npx emulate mcp`. Results remove terminal escapes and redact URL credentials and sensitive query values while preserving clean URLs. See the [MCP server guide](https://emulate.dev/docs/mcp) for client setup and tool behavior.
- ## HTTPS with portless
- [portless](https://github.com/vercel-labs/portless) gives emulators trusted HTTPS URLs with auto-generated certs and no browser warnings.
- ```bash
- # Start the portless proxy (first time only)
- portless proxy start
- # Start emulate with portless integration
- npx emulate start --portless
- ```
- Each service registers as a portless alias and gets a named HTTPS URL:
- ```
- github https://github.emulate.localhost
- google https://google.emulate.localhost
- slack https://slack.emulate.localhost
- ```
- If portless is not installed, emulate will prompt to install it (`npm i -g portless`).
- The `--portless` flag overwrites any existing portless aliases matching `*.emulate`. Aliases are removed automatically when emulate shuts down.
- For a custom base URL without portless (any reverse proxy), use `--base-url` or the `EMULATE_BASE_URL` env var:
- ```bash
- npx emulate start --base-url "https://{service}.myproxy.test"
- ```
- The `PORTLESS_URL` env var is automatically set by the `portless` CLI wrapper when running a command through it (e.g. `portless github.emulate emulate start`), typically to a value like `https://{service}.emulate.localhost`. It supports `{service}` interpolation, just like `--base-url` and `EMULATE_BASE_URL`. When no explicit `baseUrl` is provided, it is used as a fallback.
- Per-service overrides are also supported in the seed config (these take highest priority over all other base URL sources):
- ```yaml
- github:
- baseUrl: https://github.emulate.localhost
- ```
- ## Programmatic API
- ```bash
- npm install emulate
- ```
- Each call to `createEmulator` starts a single service:
- ```typescript
- import { createEmulator } from 'emulate'
- const github = await createEmulator({ service: 'github', port: 4001 })
- const vercel = await createEmulator({ service: 'vercel', port: 4002 })
- github.url // 'http://localhost:4001'
- vercel.url // 'http://localhost:4002'
- await github.close()
- await vercel.close()
- ```
- When a GitHub App omits `private_key`, `createEmulator` generates an RSA-2048 PKCS#1 key for that emulator instance:
- ```typescript
- const github = await createEmulator({
- service: 'github',
- seed: {
- github: {
- users: [{ login: 'octocat' }],
- apps: [{
- app_id: 12345,
- slug: 'my-github-app',
- name: 'My GitHub App',
- installations: [{ installation_id: 100, account: 'octocat' }],
- }],
- },
- },
- })
- const privateKey = github.generatedSecrets.find(
- secret => secret.kind === 'github.app_private_key' && secret.id === '12345',
- )?.value
- ```
- Generated keys remain stable across `reset()` calls and appear only in `generatedSecrets`. Explicitly configured keys are never returned there. A new `createEmulator` call generates a new key.
- The CLI can also generate omitted GitHub App keys when a delivery file is requested:
- ```bash
- npx emulate start --service github --seed config.yaml \
- --generated-secrets-file .emulate-secrets.json
- ```
- The destination must not exist. emulate removes inherited ACLs, verifies effective owner-only access, and publishes complete JSON before opening listeners or configuring portless. Handled startup failures remove the invocation-owned artifact so the command can be retried immediately. A hard termination such as `SIGKILL` can leave a complete published artifact that must be removed manually after confirming no invocation is using it. Only generated secrets are included. Explicitly configured keys are never copied into the artifact. Linux requires `setfacl` and `getfacl` from the `acl` package. The flag fails closed when access controls cannot be verified and is not supported on Windows. Without `--generated-secrets-file`, CLI seed files keep requiring `private_key`.
- ### Vitest / Jest setup
- ```typescript
- // vitest.setup.ts
- import { createEmulator, type Emulator } from 'emulate'
- let github: Emulator
- let vercel: Emulator
- beforeAll(async () => {
- ;[github, vercel] = await Promise.all([
- createEmulator({ service: 'github', port: 4001 }),
- createEmulator({ service: 'vercel', port: 4002 }),
- ])
- process.env.GITHUB_EMULATOR_URL = github.url
- process.env.VERCEL_EMULATOR_URL = vercel.url
- })
- afterEach(() => { github.reset(); vercel.reset() })
- afterAll(() => Promise.all([github.close(), vercel.close()]))
- ```
- ### Options
- | Option | Default | Description |
- |--------|---------|-------------|
- | `service` | *(required)* | Service name: `'vercel'`, `'github'`, `'google'`, `'slack'`, `'apple'`, `'microsoft'`, `'okta'`, `'aws'`, `'resend'`, `'stripe'`, `'mongoatlas'`, `'clerk'`, `'linear'`, `'twilio'`, or `'ai'` |
- | `port` | `4000` | Port for the HTTP server |
- | `hostname` | `127.0.0.1` | Listening address for built-in and custom emulators |
- | `seed` | none | Inline seed data (same shape as YAML config) |
- | `baseUrl` | none | Override advertised base URL. Per-service `baseUrl` in seed config takes highest priority, then this option, then `EMULATE_BASE_URL` env var (supports `{service}`), then `PORTLESS_URL` (supports `{service}`, automatically set by the `portless` CLI wrapper), then `http://<listening host>:<port>`, with `localhost` for loopback and wildcard hosts. |
- Use `hostname: '0.0.0.0'` to allow connections from containers or other machines, and `baseUrl` to advertise a URL reachable by those clients.
- ### Instance methods
- | Method | Description |
- |--------|-------------|
- | `url` | Base URL of the running server |
- | `generatedSecrets` | Readonly secrets generated while preparing seed data |
- | `reset()` | Wipe the store and replay seed data |
- | `close()` | Shut down the HTTP server, returns a Promise |
- ## Configuration
- Configuration is optional. The CLI auto-detects config files in this order: `emulate.config.yaml` / `.yml`, `emulate.config.json`, `service-emulator.config.yaml` / `.yml`, `service-emulator.config.json`. Or pass `--seed <file>` explicitly. Run `npx emulate init` to generate a starter file.
- ```yaml
- tokens:
- my_token:
- login: admin
- scopes: [repo, user]
- vercel:
- users:
- - username: developer
- name: Developer
- email: dev@example.com
- teams:
- - slug: my-team
- name: My Team
- projects:
- - name: my-app
- team: my-team
- framework: nextjs
- github:
- users:
- - login: octocat
- name: The Octocat
- email: octocat@github.com
- orgs:
- - login: my-org
- name: My Organization
- members:
- - login: octocat
- role: admin
- repos:
- - owner: octocat
- name: hello-world
- language: JavaScript
- auto_init: true
- strict_scopes: false
- google:
- users:
- - email: testuser@example.com
- name: Test User
- - email: admin@acme.com
- name: Admin
- hd: acme.com
- oauth_clients:
- - client_id: my-client-id.apps.googleusercontent.com
- client_secret: GOCSPX-secret
- redirect_uris:
- - http://localhost:3000/api/auth/callback/google
- labels:
- - id: Label_ops
- user_email: testuser@example.com
- name: Ops/Review
- color_background: "#DDEEFF"
- color_text: "#111111"
- messages:
- - id: msg_welcome
- user_email: testuser@example.com
- from: welcome@example.com
- to: testuser@example.com
- subject: Welcome to the Gmail emulator
- body_text: You can now test Gmail, Calendar, and Drive flows locally.
- label_ids: [INBOX, UNREAD, CATEGORY_UPDATES]
- calendars:
- - id: primary
- user_email: testuser@example.com
- summary: testuser@example.com
- primary: true
- selected: true
- time_zone: UTC
- calendar_events:
- - id: evt_kickoff
- user_email: testuser@example.com
- calendar_id: primary
- summary: Project Kickoff
- start_date_time: 2025-01-10T09:00:00.000Z
- end_date_time: 2025-01-10T09:30:00.000Z
- drive_items:
- - id: drv_docs
- user_email: testuser@example.com
- name: Docs
- mime_type: application/vnd.google-apps.folder
- parent_ids: [root]
- slack:
- team:
- name: My Workspace
- domain: my-workspace
- users:
- - name: developer
- real_name: Developer
- email: dev@example.com
- profile:
- title: Local Developer
- status_text: Testing locally
- status_emoji: ":computer:"
- presence: active
- channels:
- - name: general
- topic: General discussion
- - name: random
- topic: Random stuff
- bots:
- - name: my-bot
- oauth_apps:
- - client_id: "12345.67890"
- client_secret: example_client_secret
- app_id: A000000001
- name: My Slack App
- redirect_uris:
- - http://localhost:3000/api/auth/callback/slack
- scopes:
- - chat:write
- - channels:read
- - channels:history
- - channels:join
- - channels:manage
- - channels:write
- - groups:read
- - groups:history
- - groups:write
- - im:read
- - im:history
- - im:write
- - mpim:read
- - mpim:history
- - mpim:write
- - users:read
- - users:read.email
- - users.profile:read
- - users.profile:write
- - users:write
- - files:read
- - files:write
- - pins:read
- - pins:write
- - bookmarks:read
- - bookmarks:write
- - reactions:read
- - reactions:write
- - team:read
- user_scopes: [users:read, users.profile:read]
- bot_name: my-bot
- tokens:
- - token: xoxb-local-test
- user: developer
- scopes:
- - chat:write
- - channels:read
- - channels:history
- - channels:join
- - channels:manage
- - channels:write
- - groups:read
- - groups:history
- - groups:write
- - im:read
- - im:history
- - im:write
- - mpim:read
- - mpim:history
- - mpim:write
- - users:read
- - users:read.email
- - users.profile:read
- - users.profile:write
- - users:write
- - files:read
- - files:write
- - pins:read
- - pins:write
- - bookmarks:read
- - bookmarks:write
- - reactions:read
- - reactions:write
- - team:read
- strict_scopes: false
- linear:
- organization:
- name: Acme
- url_key: acme
- users:
- - email: admin@example.com
- name: Admin User
- admin: true
- - email: dev@example.com
- name: Developer
- teams:
- - key: ENG
- name: Engineering
- states:
- - name: Backlog
- type: backlog
- - name: Todo
- type: unstarted
- - name: In Progress
- type: started
- - name: Done
- type: completed
- labels:
- - name: Bug
- color: "#d92d20"
- team: ENG
- - name: Feature
- color: "#2563eb"
- team: ENG
- issues:
- - team: ENG
- title: Fix local checkout test
- description: Reproduce and fix the checkout failure.
- state: Todo
- assignee: dev@example.com
- labels: [Bug]
- oauth_apps:
- - client_id: lin_example_client_id
- client_secret: example_client_secret
- name: My Linear App
- redirect_uris:
- - http://localhost:3000/api/auth/callback/linear
- scopes: [read, write, issues:create, comments:create]
- actor: user
- tokens:
- - token: lin_test_admin
- user: admin@example.com
- scopes: [read, write, issues:create, comments:create, admin]
- strict_scopes: false
- apple:
- users:
- - email: testuser@icloud.com
- name: Test User
- oauth_clients:
- - client_id: com.example.app
- team_id: TEAM001
- name: My Apple App
- redirect_uris:
- - http://localhost:3000/api/auth/callback/apple
- microsoft:
- users:
- - email: testuser@outlook.com
- name: Test User
- oauth_clients:
- - client_id: example-client-id
- client_secret: example-client-secret
- name: My Microsoft App
- redirect_uris:
- - http://localhost:3000/api/auth/callback/microsoft-entra-id
- aws:
- region: us-east-1
- s3:
- buckets:
- - name: my-app-bucket
- - name: my-app-uploads
- sqs:
- queues:
- - name: my-app-events
- - name: my-app-dlq
- iam:
- users:
- - user_name: developer
- create_access_key: true
- roles:
- - role_name: lambda-execution-role
- description: Role for Lambda function execution
- kms:
- keys:
- - key_id: 1234abcd-12ab-34cd-56ef-1234567890ab
- description: App data key
- aliases: [alias/my-app-key]
- okta:
- users:
- - login: testuser@okta.local
- email: testuser@okta.local
- first_name: Test
- last_name: User
- groups:
- - name: Everyone
- description: All users
- type: BUILT_IN
- okta_id: 00g_everyone
- authorization_servers:
- - id: default
- name: default
- audiences: [api://default]
- oauth_clients:
- - client_id: okta-test-client
- client_secret: okta-test-secret
- name: Sample OIDC Client
- redirect_uris:
- - http://localhost:3000/callback
- auth_server_id: default
- strict_scopes: false
- resend:
- domains:
- - name: example.com
- region: us-east-1
- contacts:
- - email: test@example.com
- first_name: Test
- last_name: User
- stripe:
- customers:
- - email: test@example.com
- name: Test Customer
- products:
- - name: Pro Plan
- description: Monthly pro subscription
- prices:
- - product_name: Pro Plan
- currency: usd
- unit_amount: 2000
- strict_scopes: false
- mongoatlas:
- projects:
- - name: Project0
- clusters:
- - name: Cluster0
- project: Project0
- database_users:
- - username: admin
- project: Project0
- databases:
- - cluster: Cluster0
- name: test
- collections: [items]
- clerk:
- users:
- - first_name: Test
- last_name: User
- email_addresses: [test@example.com]
- password: clerk_test_password
- organizations:
- - name: My Company
- slug: my-company
- members:
- - email: test@example.com
- role: admin
- oauth_applications:
- - client_id: clerk_emulate_client
- client_secret: clerk_emulate_secret
- name: Emulate App
- redirect_uris:
- - http://localhost:3000/api/auth/callback/clerk
- twilio:
- account:
- sid: AC00000000000000000000000000000000
- auth_token: twilio_test_auth_token
- friendly_name: Local Twilio Account
- api_keys:
- - sid: SK00000000000000000000000000000000
- secret: twilio_test_api_secret
- friendly_name: Local API Key
- phone_numbers:
- - phone_number: "+15551234567"
- friendly_name: Local SMS and Voice Number
- sms_url: http://localhost:3000/api/twilio/sms
- voice_url: http://localhost:3000/api/twilio/voice
- messaging_services:
- - friendly_name: Local Messaging Service
- phone_numbers: ["+15551234567"]
- verify_services:
- - friendly_name: Local Verify Service
- code: "123456"
- default_channel: sms
- conversations:
- services:
- - friendly_name: Local Conversations
- ai:
- strict: false
- timing:
- ttftMs: 0
- chunkDelayMs: 0
- models: [gpt-x]
- rules:
- - id: weather-call
- match: { textContains: weather, tool: get_weather, hasToolResult: false }
- times: 1
- reply:
- - type: tool_call
- name: get_weather
- arguments: { city: Paris }
- - id: weather-result
- match: { hasToolResult: true }
- reply:
- - type: text
- text: The temperature in Paris is 20 C.
- - id: rate-limit-once
- match: { textContains: retry }
- times: 1
- error:
- status: 429
- message: Injected rate limit. Retry this request.
- headers:
- retry-after: "1"
- ```
- GitHub organization `members` are optional. Each entry references a seeded user by `login`; `role` defaults to `member`, while `admin` creates an organization administrator. Unknown users are ignored. Seeded memberships use the synthetic `members` team and grant private organization repository access.
- ## OAuth & Integrations
- The emulator supports configurable OAuth apps and integrations with strict client validation.
- ### Vercel Integrations
- ```yaml
- vercel:
- integrations:
- - client_id: "oac_abc123"
- client_secret: "secret_abc123"
- name: "My Vercel App"
- redirect_uris:
- - "http://localhost:3000/api/auth/callback/vercel"
- ```
- ### GitHub OAuth Apps
- ```yaml
- github:
- oauth_apps:
- - client_id: "Iv1.abc123"
- client_secret: "secret_abc123"
- name: "My Web App"
- redirect_uris:
- - "http://localhost:3000/api/auth/callback/github"
- ```
- If no `oauth_apps` are configured, the emulator accepts any `client_id` (backward-compatible). With apps configured, strict validation is enforced, and an authorization code can only be exchanged by the app it was issued to.
- `DELETE /applications/:client_id/token` and `DELETE /applications/:client_id/grant` take the app's `client_id` and `client_secret` as HTTP Basic credentials and an `access_token` in the JSON body. The first revokes that token; the second revokes the user's grant and every token the app holds for that user. Wrong client credentials return `401`, and a token that is unknown or belongs to another app returns `422`. A revoked token then fails as `401 Bad credentials`, even when unknown tokens fall back to a default user.
- ### GitHub Apps
- Full GitHub App support with JWT authentication and installation access tokens:
- ```yaml
- github:
- apps:
- - app_id: 12345
- slug: "my-github-app"
- name: "My GitHub App"
- permissions:
- contents: read
- issues: write
- events: [push, pull_request]
- webhook_url: "http://localhost:3000/webhooks/github"
- webhook_secret: "my-secret"
- installations:
- - installation_id: 100
- account: my-org
- repository_selection: all
- ```
- JWT authentication: sign a JWT with `{ iss: "<app_id>" }` using the app's private key (RS256). The emulator verifies the signature and resolves the app. For programmatic `createEmulator` calls, omit `private_key` and read the generated RSA key from `generatedSecrets`. The CLI generates an omitted key only when `--generated-secrets-file <path>` is provided; otherwise it requires an explicit, valid private key. Do not replace the omitted field with a fake PEM placeholder.
- Installation access tokens act as the configured GitHub App bot for repository writes. Repository ownership, selected repository access, and requested App permissions remain enforced. Pull request merges require `contents: write` on the base repository. Pull request branch updates require `pull_requests: write` on the pull request repository and `contents: write` on the head repository.
- Inspect secret-free metadata for minted installation tokens at `GET /_emulate/installation-tokens`.
- **App webhook delivery**: When events occur on repos where a GitHub App is installed, the emulator mirrors real GitHub behavior:
- - All webhook payloads (including repo and org hooks) include an `installation` field with `{ id, node_id }`.
- - If the app has a `webhook_url`, the emulator delivers the event there with the `installation` field and (if configured) an `X-Hub-Signature-256` header signed with `webhook_secret`.
- ### Slack OAuth Apps
- ```yaml
- slack:
- signing_secret: "my_signing_secret"
- oauth_apps:
- - client_id: "12345.67890"
- client_secret: "example_client_secret"
- name: "My Slack App"
- redirect_uris:
- - "http://localhost:3000/api/auth/callback/slack"
- ```
- The signing secret applies to every outbound Slack event subscription callback. Each signed callback includes `X-Slack-Request-Timestamp` and `X-Slack-Signature`, calculated as `v0=<HMAC-SHA256(secret, "v0:<timestamp>:<raw-body>")>`. Configure the receiver with the same secret and verify the unparsed request body. If the secret is absent or empty, callbacks are unsigned.
- ### Linear OAuth Apps
- ```yaml
- linear:
- oauth_apps:
- - client_id: "lin_example_client_id"
- client_secret: "example_client_secret"
- name: "My Linear App"
- redirect_uris:
- - "http://localhost:3000/api/auth/callback/linear"
- scopes: [read, write, issues:create, comments:create]
- actor: user
- ```
- ### Apple OAuth Clients
- ```yaml
- apple:
- oauth_clients:
- - client_id: "com.example.app"
- team_id: "TEAM001"
- name: "My Apple App"
- redirect_uris:
- - "http://localhost:3000/api/auth/callback/apple"
- ```
- ### Microsoft OAuth Clients
- ```yaml
- microsoft:
- oauth_clients:
- - client_id: "example-client-id"
- client_secret: "example-client-secret"
- name: "My Microsoft App"
- redirect_uris:
- - "http://localhost:3000/api/auth/callback/microsoft-entra-id"
- ```
- ## Vercel API
- Every endpoint below is fully stateful with Vercel-style JSON responses and cursor-based pagination.
- ### User & Teams
- - `GET /v2/user` - authenticated user
- - `PATCH /v2/user` - update user
- - `GET /v2/teams` - list teams (cursor paginated)
- - `GET /v2/teams/:teamId` - get team (by ID or slug)
- - `POST /v2/teams` - create team
- - `PATCH /v2/teams/:teamId` - update team
- - `GET /v2/teams/:teamId/members` - list members
- - `POST /v2/teams/:teamId/members` - add member
- ### Projects
- - `POST /v11/projects` - create project (with optional env vars and git integration)
- - `GET /v10/projects` - list projects (search, cursor pagination)
- - `GET /v9/projects/:idOrName` - get project (includes env vars)
- - `PATCH /v9/projects/:idOrName` - update project
- - `DELETE /v9/projects/:idOrName` - delete project (cascades)
- - `GET /v1/projects/:projectId/promote/aliases` - promote aliases status
- - `PATCH /v1/projects/:idOrName/protection-bypass` - manage bypass secrets
- ### Deployments
- - `POST /v13/deployments` - create deployment (auto-transitions to READY)
- - `GET /v13/deployments/:idOrUrl` - get deployment (by ID or URL)
- - `GET /v6/deployments` - list deployments (filter by project, target, state)
- - `GET /v7/deployments` - list deployments (filter by project, target, state, commit SHA)
- - `DELETE /v13/deployments/:id` - delete deployment (cascades)
- - `PATCH /v12/deployments/:id/cancel` - cancel building deployment
- - `GET /v2/deployments/:id/aliases` - list deployment aliases
- - `GET /v3/deployments/:idOrUrl/events` - get build events/logs
- - `GET /v6/deployments/:id/files` - list deployment files
- - `POST /v2/files` - upload file (by SHA digest)
- ### Domains
- - `POST /v10/projects/:idOrName/domains` - add domain (with verification challenge)
- - `GET /v9/projects/:idOrName/domains` - list domains
- - `GET /v9/projects/:idOrName/domains/:domain` - get domain
- - `PATCH /v9/projects/:idOrName/domains/:domain` - update domain
- - `DELETE /v9/projects/:idOrName/domains/:domain` - remove domain
- - `POST /v9/projects/:idOrName/domains/:domain/verify` - verify domain
- ### Environment Variables
- - `GET /v10/projects/:idOrName/env` - list env vars (with decrypt option)
- - `POST /v10/projects/:idOrName/env` - create env vars (single, batch, upsert)
- - `GET /v10/projects/:idOrName/env/:id` - get env var
- - `PATCH /v9/projects/:idOrName/env/:id` - update env var
- - `DELETE /v9/projects/:idOrName/env/:id` - delete env var
- ### Blob
- Implements the Vercel Blob API used by the `@vercel/blob` SDK (`put`, `head`, `list`, `del`).
- - `PUT /api/blob?pathname=<path>` - upload a blob (honors `x-add-random-suffix`, `x-allow-overwrite`, `x-content-type`, `x-cache-control-max-age`, `x-if-match` headers)
- - `PUT /api/blob?pathname=<path>&fromUrl=<url>` - copy a blob (`copy()`); `x-if-match` is compared with the source blob's ETag, and an existing destination is always replaced
- - `GET /api/blob?url=<urlOrPathname>` - blob metadata (`head()`)
- - `GET /api/blob?prefix=&limit=&cursor=&mode=` - list blobs (`list()`, including folded mode, where folders and root blobs share one sorted page and cursor)
- - `POST /api/blob/delete` - delete blobs (`del()`)
- - `POST /api/blob/mpu` with `x-mpu-action: create` - start a multipart upload (`createMultipartUpload()`), returning `{ key, uploadId }`
- - `GET /blob/:storeId/<pathname>` - serve blob content (public, no auth; `?download=1` adds an attachment disposition)
- Upload and deletion rules:
- - A single leading slash is removed from the pathname, so `/docs/readme.txt` is stored as `docs/readme.txt`. As in the real service, `//` is otherwise accepted over HTTP, so `//a.txt` is stored as `/a.txt` (the `@vercel/blob` SDK rejects `//` before sending a request). This also applies to copy destinations and multipart uploads.
- - The content type is taken from `x-content-type`, then the pathname extension when it is a known type, then the request `Content-Type` header, then `application/octet-stream`.
- - `x-cache-control-max-age` has a minimum of 60 seconds (`0` is stored as `public, max-age=60`). Absent or invalid values default to 30 days.
- - Deleting with a missing or empty `urls` array returns 400 `Missing urls in request body`. Malformed JSON returns 400 `Cannot delete more than 1,000 urls at once or body is malformed`, more than 1,000 urls returns 400 `Cannot delete more than 1,000 urls at once`, and any non-string entry returns 400 `Some urls are malformed`. Nothing is deleted in any of these cases.
- Point the SDK at the emulator with two environment variables:
- ```bash
- VERCEL_BLOB_API_URL=http://localhost:4000/api/blob
- BLOB_READ_WRITE_TOKEN=vercel_blob_rw_mystore_secret
- ```
- Any token of the form `vercel_blob_rw_<storeId>_<secret>` is accepted; the store id is parsed from the token. Multipart uploads can be created, but uploading parts and completing the upload are not supported yet and return 400. Client (browser) uploads are not supported yet.
- ## GitHub API
- Every endpoint below is fully stateful. Creates, updates, and deletes persist in memory and affect related entities.
- ### Users
- - `GET /user` - authenticated user
- - `PATCH /user` - update profile
- - `GET /users/:username` - get user
- - `GET /users` - list users
- - `GET /users/:username/repos` - list user repos
- - `GET /users/:username/orgs` - list user orgs
- - `GET /users/:username/followers` - list followers
- - `GET /users/:username/following` - list following
- ### Repositories
- - `GET /repos/:owner/:repo` - get repo
- - `GET /repositories/:id` - get repo by numeric ID
- - `POST /user/repos` - create user repo
- - `POST /orgs/:org/repos` - create org repo
- - `PATCH /repos/:owner/:repo` - update repo
- - `DELETE /repos/:owner/:repo` - delete repo (cascades)
- - `GET/PUT /repos/:owner/:repo/topics` - get/replace topics
- - `GET /repos/:owner/:repo/languages` - languages
- - `GET /repos/:owner/:repo/contributors` - contributors
- - `GET /repos/:owner/:repo/forks` - list forks
- - `POST /repos/:owner/:repo/forks` - create fork
- - `GET/PUT/DELETE /repos/:owner/:repo/collaborators/:username` - collaborators
- - `GET /repos/:owner/:repo/collaborators/:username/permission`
- - `POST /repos/:owner/:repo/transfer` - transfer repo
- - `GET /repos/:owner/:repo/tags` - list tags
- ### Contents & Commit History
- - `GET /repos/:owner/:repo/readme` - get the repository README
- - `GET /repos/:owner/:repo/contents/:path` - get a file or list a directory at a ref
- - Send `Accept: application/vnd.github.raw` or `application/vnd.github.raw+json` to file Contents and README requests to receive raw bytes; directory and submodule responses remain JSON
- - `GET /:owner/:repo/raw/:ref/:path` - download file content from advertised raw URLs; this is separate from Accept negotiation
- - `PUT/DELETE /repos/:owner/:repo/contents/:path` - create, update, or delete a file and commit the change
- - `GET /repos/:owner/:repo/commits` - list commits with ref, path, author, and date filters
- - `GET /repos/:owner/:repo/commits/:ref` - get a commit with file diffs and stats
- - `GET /repos/:owner/:repo/compare/:base...:head` - compare two refs
- ### Issues
- - `GET /repos/:owner/:repo/issues` - list (filter by state, labels, assignee, milestone, creator, since)
- - `POST /repos/:owner/:repo/issues` - create
- - `GET /repos/:owner/:repo/issues/:number` - get
- - `PATCH /repos/:owner/:repo/issues/:number` - update (state transitions, events)
- - `PUT/DELETE /repos/:owner/:repo/issues/:number/lock` - lock/unlock
- - `GET /repos/:owner/:repo/issues/:number/timeline` - timeline events
- - `GET /repos/:owner/:repo/issues/:number/events` - events
- - `POST/DELETE /repos/:owner/:repo/issues/:number/assignees` - manage assignees
- ### Pull Requests
- - `GET /repos/:owner/:repo/pulls` - list (filter by state, head, base)
- - `POST /repos/:owner/:repo/pulls` - create
- - `GET /repos/:owner/:repo/pulls/:number` - get
- - `PATCH /repos/:owner/:repo/pulls/:number` - update
- - `PUT /repos/:owner/:repo/pulls/:number/merge` - merge (with branch protection enforcement)
- - `GET /repos/:owner/:repo/pulls/:number/commits` - list commits
- - `GET /repos/:owner/:repo/pulls/:number/files` - list files
- - `POST/DELETE /repos/:owner/:repo/pulls/:number/requested_reviewers` - manage reviewers
- - `PUT /repos/:owner/:repo/pulls/:number/update-branch` - update branch
- ### Comments
- - Issue comments: full CRUD on `/repos/:owner/:repo/issues/:number/comments`
- - Review comments: full CRUD on `/repos/:owner/:repo/pulls/:number/comments`
- - Commit comments: full CRUD on `/repos/:owner/:repo/commits/:sha/comments`
- - Repo-wide listings for each type
- ### Reviews
- - `GET /repos/:owner/:repo/pulls/:number/reviews` - list
- - `POST /repos/:owner/:repo/pulls/:number/reviews` - create (with inline comments)
- - `GET/PUT /repos/:owner/:repo/pulls/:number/reviews/:id` - get/update
- - `POST /repos/:owner/:repo/pulls/:number/reviews/:id/events` - submit
- - `PUT /repos/:owner/:repo/pulls/:number/reviews/:id/dismissals` - dismiss
- ### Labels & Milestones
- - Labels: full CRUD, add/remove from issues, replace all
- - Milestones: full CRUD, state transitions, issue counts
- ### Branches & Git Data
- - Branches: list, get, protection CRUD (status checks, PR reviews, enforce admins)
- - Refs: get, match, create, update, delete
- - Commits: get, create
- - Trees: get (with recursive), create (with inline content)
- - Blobs: get, create
- - Tags: get, create
- ### Organizations & Teams
- - Orgs: get, update, list
- - Org members: list, check, remove, get/set membership
- - Teams: full CRUD, members, repos
- ### Releases
- - Releases: full CRUD, latest, by tag
- - Release assets: full CRUD, upload
- - Generate release notes
- ### Webhooks
- - Repo webhooks: full CRUD, ping, test, deliveries
- - Org webhooks: full CRUD, ping
- - Real HTTP delivery to registered URLs on all state changes
- ### Search
- - `GET /search/repositories` - full query syntax (user, org, language, topic, stars, forks, etc.)
- - `GET /search/issues` - issues + PRs (repo, is, author, label, milestone, state, etc.)
- - `GET /search/users` - users + orgs
- - `GET /search/code` - blob content search
- - `GET /search/commits` - commit message search
- - `GET /search/topics` - topic search
- - `GET /search/labels` - label search
- ### Actions
- - Workflows: list, get, enable/disable, dispatch
- - Workflow runs: list, get, cancel, rerun, delete, logs
- - Jobs: list, get, logs
- - Artifacts: list, get, delete
- - Secrets: repo + org CRUD
- ### Checks
- - Check runs: create, update, get, annotations, rerequest, list by ref/suite. Ref based lookups accept branch and tag refs containing slashes.
- - Check suites: create, get, preferences, rerequest, list by ref. Ref based lookups accept branch and tag refs containing slashes.
- - Automatic suite status rollup from check run results
- Check-run lists by ref and suite support `page` and `per_page` (default 30, maximum 100) with pagination `Link` headers. Ref lists apply `check_name`, `status`, and `filter` before pagination; `total_count` reports the full filtered count.
- Checks created with installation tokens include their GitHub App in API responses and webhooks. Suites are separated by App and commit, and `filter=latest` keeps the newest run for each App and check name. User-token checks return `app: null`; request-body `app_id` cannot set or change attribution.
- ### Misc
- - `GET /rate_limit` - rate limit status
- - `GET /meta` - server metadata
- - `GET /octocat` - ASCII art
- - `GET /emojis` - emoji URLs
- - `GET /zen` - random zen phrase
- - `GET /versions` - API versions
- ## Google OAuth + Gmail, Calendar, and Drive APIs
- OAuth 2.0, OpenID Connect, and mutable Google Workspace-style surfaces for local inbox, calendar, and drive flows.
- Google ID tokens are RS256-signed JWTs. The discovery document advertises RS256, and `/oauth2/v3/certs` returns the matching RSA public key used to verify issued tokens.
- Google authentication is permissive by default for local bearer-token workflows. Set `google.strict_scopes: true` in seed config to require emulator-issued, unexpired access tokens on Gmail, Calendar, Drive, and userinfo routes. Invalid credentials return `401 UNAUTHENTICATED`; missing method scopes return `403` with `insufficientPermissions`. Strict mode distinguishes read, write, send, settings, and metadata scopes, and userinfo includes only granted identity claims. Revoking an access or refresh token invalidates the linked access and refresh credentials. Discovery, signing keys, and the sign-in page remain public. This mode checks method scopes; resource-specific grants such as `drive.file` and Gmail add-on scopes are not modeled.
- - `GET /o/oauth2/v2/auth` - authorization endpoint
- - `POST /oauth2/token` - token exchange
- - `GET /oauth2/v2/userinfo` - get user info
- - `GET /.well-known/openid-configuration` - OIDC discovery document
- - `GET /oauth2/v3/certs` - JSON Web Key Set (JWKS) with the RSA public key for ID token verification
- - `GET /gmail/v1/users/:userId/messages` - list messages with `q`, `labelIds`, `maxResults`, and `pageToken`
- - `GET /gmail/v1/users/:userId/messages/:id` - fetch a Gmail-style message payload in `full`, `metadata`, `minimal`, or `raw` formats
- - `GET /gmail/v1/users/:userId/messages/:messageId/attachments/:id` - fetch attachment bodies
- - `POST /gmail/v1/users/:userId/messages/send` - create sent mail from `raw` MIME or structured fields
- - `POST /gmail/v1/users/:userId/messages/import` - import inbox mail
- - `POST /gmail/v1/users/:userId/messages` - insert a message directly
- - `POST /gmail/v1/users/:userId/messages/:id/modify` - add/remove labels on one message
- - `POST /gmail/v1/users/:userId/messages/batchModify` - add/remove labels across many messages
- - `POST /gmail/v1/users/:userId/messages/:id/trash` and `POST /gmail/v1/users/:userId/messages/:id/untrash`
- - `GET /gmail/v1/users/:userId/drafts`, `POST /gmail/v1/users/:userId/drafts`, `GET /gmail/v1/users/:userId/drafts/:id`, `PUT /gmail/v1/users/:userId/drafts/:id`, `POST /gmail/v1/users/:userId/drafts/:id/send`, `DELETE /gmail/v1/users/:userId/drafts/:id`
- - `POST /gmail/v1/users/:userId/threads/:id/modify` - add/remove labels across a thread
- - `GET /gmail/v1/users/:userId/threads` and `GET /gmail/v1/users/:userId/threads/:id`
- - `GET /gmail/v1/users/:userId/labels`, `POST /gmail/v1/users/:userId/labels`, `PATCH /gmail/v1/users/:userId/labels/:id`, `DELETE /gmail/v1/users/:userId/labels/:id`
- - `GET /gmail/v1/users/:userId/history`, `POST /gmail/v1/users/:userId/watch`, `POST /gmail/v1/users/:userId/stop`
- - `GET /gmail/v1/users/:userId/settings/filters`, `POST /gmail/v1/users/:userId/settings/filters`, `DELETE /gmail/v1/users/:userId/settings/filters/:id`
- - `GET /gmail/v1/users/:userId/settings/forwardingAddresses`, `GET /gmail/v1/users/:userId/settings/sendAs`
- - `GET /discovery/v1/apis/calendar/v3/rest` — public Calendar v3 REST discovery document
- - `GET /calendar/v3/users/:userId/calendarList`, `GET /calendar/v3/calendars/:calendarId/events`, `POST /calendar/v3/calendars/:calendarId/events`, `DELETE /calendar/v3/calendars/:calendarId/events/:eventId`, `POST /calendar/v3/freeBusy`
- - `GET /drive/v3/files`, `GET /drive/v3/files/:fileId`, `POST /drive/v3/files`, `PATCH /drive/v3/files/:fileId`, `PUT /drive/v3/files/:fileId`, `POST /upload/drive/v3/files`
- ## Slack API
- Fully stateful Slack Web API emulation with channels, messages, threads, reactions, user profiles, presence, modern file uploads, pins, bookmarks, views, OAuth v2, and incoming webhooks. Chat writes preserve common rich message fields such as `blocks`, `attachments`, `metadata`, formatting flags, unfurl flags, and client message ids. Conversation writes update archive state, names, topics, purposes, membership, DMs, MPIMs, and read cursors. User writes update profile fields, status, custom fields, and deterministic active or away presence. File writes support the current external upload flow with local upload URLs, file share messages, reads, lists, downloads, and deletes. Pin and bookmark writes support channel message pins and link bookmarks. View writes support App Home publishing and modal stacks. Seeded OAuth apps and OAuth installs create bot users and installation records. OAuth exchanges and explicit token seeds create scoped token records. Supported write state changes dispatch Slack `event_callback` payloads to configured webhook URLs.
- Set `slack.signing_secret` in seed config to sign every outbound event subscription callback. The emulator sends `X-Slack-Request-Timestamp` and `X-Slack-Signature`, where the signature is `v0=<HMAC-SHA256(secret, "v0:<timestamp>:<raw-body>")>`. Configure the receiver with the same secret and verify the unparsed request body. Without a secret, callbacks are unsigned.
- Slack message text is limited to 40,000 Unicode characters across chat writes, incoming webhooks, and file upload initial comments. Longer text is truncated at a Unicode code point boundary before it is stored or dispatched. Successful Web API responses include `warning: "message_truncated"` and `response_metadata` with the matching warning and explanatory message. Rich fields such as `blocks` and `attachments` are preserved unchanged.
- `chat.postMessage`, `chat.postEphemeral`, `chat.update`, and `chat.scheduleMessage` accept `markdown_text` in place of `text`. The emulator stores the Markdown source as the message `text` and adds no blocks, since Slack doesn't document how it reads such a message back. Sending `markdown_text` with a non-empty `text` or with `blocks` returns `markdown_text_conflict`, and an empty `markdown_text` counts as no text. Slack's 12,000-character limit for `markdown_text` is not enforced.
- ### Auth & Chat
- - `POST /api/auth.test` - test authentication
- - `POST /api/auth.revoke` - revoke the calling token (`test=1` checks without revoking); later Web API calls with it return `invalid_auth`. Revoking a bot token keeps the app installed but deactivates the bot user and removes it from its channels, so it gets no more `app_mention` events until the app is installed again
- - `POST /api/chat.postMessage` - post message with text or rich payload fields (supports threads via `thread_ts` and DM user IDs)
- - `POST /api/chat.postEphemeral` - post ephemeral message outside channel history
- - `POST /api/chat.update` - update message text and rich payload fields
- - `POST /api/chat.delete` - delete message
- - `GET /api/chat.getPermalink` / `POST /api/chat.getPermalink` - get message permalink
- - `POST /api/chat.scheduleMessage` - schedule pending message
- - `POST /api/chat.deleteScheduledMessage` - delete pending scheduled message
- - `POST /api/chat.scheduledMessages.list` - list pending scheduled messages
- - `POST /api/chat.meMessage` - /me message
- ### Conversations
- - `POST /api/conversations.list` - list conversations (cursor pagination, `types`, `exclude_archived`)
- - `POST /api/conversations.info` - get channel info
- - `POST /api/conversations.create` - create channel
- - `POST /api/conversations.archive` / `conversations.unarchive` - archive/restore channel
- - `POST /api/conversations.rename` - rename channel
- - `POST /api/conversations.setTopic` / `conversations.setPurpose` - update topic/purpose
- - `POST /api/conversations.history` - channel history with rich message fields
- - `POST /api/conversations.replies` - thread replies with rich message fields
- - `POST /api/conversations.join` / `conversations.leave` - join/leave
- - `POST /api/conversations.invite` / `conversations.kick` - manage membership
- - `POST /api/conversations.open` / `conversations.close` - open/close DMs and MPIMs
- - `POST /api/conversations.mark` - mark read cursor
- - `POST /api/conversations.members` - list members
- ### Users & Reactions
- - `POST /api/users.list` - list users (cursor pagination)
- - `POST /api/users.info` - get user info
- - `POST /api/users.lookupByEmail` - lookup by email
- - `GET /api/users.profile.get` / `POST /api/users.profile.get` - get user profile fields
- - `POST /api/users.profile.set` - update profile fields, status, and custom fields
- - `GET /api/users.getPresence` / `POST /api/users.getPresence` - get active or away presence
- - `POST /api/users.setPresence` - set the authed user to away or automatic presence
- - `POST /api/reactions.add` / `reactions.remove` / `reactions.get` - manage reactions
- ### Files
- - `POST /api/files.getUploadURLExternal` - create a local external upload session
- - `POST /upload/v1/:fileId` - receive raw uploaded file bytes
- - `POST /api/files.completeUploadExternal` - complete uploads and optionally share file messages
- - `GET /api/files.info` / `POST /api/files.info` - get file metadata
- - `GET /api/files.list` / `POST /api/files.list` - list completed files
- - `GET /files-pri/:fileId/:filename` - download file bytes with a bearer token that can access the file
- - `POST /api/files.delete` - delete a completed file
- ### Pins & Bookmarks
- - `POST /api/pins.add` - pin a message to a channel
- - `GET /api/pins.list` / `POST /api/pins.list` - list pinned message items for a channel
- - `POST /api/pins.remove` - remove a message pin from a channel
- - `POST /api/bookmarks.add` - add a link bookmark to a channel
- - `POST /api/bookmarks.edit` - update a link bookmark
- - `POST /api/bookmarks.list` - list channel bookmarks
- - `POST /api/bookmarks.remove` - remove a bookmark from a channel
- ### Views
- - `POST /api/views.publish` - publish or update an App Home view for a user
- - `POST /api/views.open` - open a modal view
- - `POST /api/views.update` - update a view by `view_id` or `external_id`
- - `POST /api/views.push` - push a modal view onto the current modal stack
- - `POST /api/views.generateTriggerId` - local helper for tests that need a modal trigger id
- Modal opens and pushes accept `trigger_id` or `interactivity_pointer` from an interaction payload or `/api/views.generateTriggerId`. Generate push values with an existing `view_id`. Triggers expire after 3 seconds by default; set `slack.view_trigger_ttl_seconds` to a positive number to allow more time in local tests.
- ### Team, Bots & Webhooks
- - `POST /api/team.info` - workspace info
- - `POST /api/bots.info` - bot info
- - `POST /services/:teamId/:botId/:webhookId` - incoming webhook with text or rich payload fields
- ### Channel privacy conversions
- `POST /api/admin.conversations.convertToPrivate` and `POST /api/admin.conversations.convertToPublic` accept `channel_id`. Use a user token belonging to a seeded admin; bot and test tokens return `not_allowed_token_type`, and non-admin users return `missing_scope`. With `slack.strict_scopes: true`, the token also needs `admin.conversations:write`. For example:
- ```yaml
- slack:
- tokens:
- - token: local-admin-user
- type: user
- user: admin
- scopes: [admin.conversations:write, channels:read, groups:read]
- ```
- Conversions preserve the channel ID, members, and history, update visibility in conversation and file reads, and append a `message` with subtype `channel_convert_to_private` or `channel_convert_to_public`. Event callbacks include the acting user and the new `channel_type` (`group` or `channel`). Admins need not belong to the channel. DMs, MPIMs, and repeated conversions are rejected; `#general` cannot become private.
- These methods operate on the emulated workspace without Slack's Enterprise plan or organization-wide installation requirements. Enterprise roles, channel-management policies, and MPIM conversion are not simulated.
- ### Slack Connect fixtures
- Seed a user with a different `team_id` to test messages from another workspace. `users.info` and `users.list` return that user's workspace and `is_stranger` flag. Omitted user teams default to the emulated workspace. `is_stranger` defaults to `false` and can be seeded to model a user outside the app's visible shared channels.
- ```yaml
- slack:
- users:
- - name: partner
- team_id: T_PARTNER
- is_stranger: false
- tokens:
- - token: xoxp-partner
- type: user
- user: partner
- scopes: [chat:write]
- ```
- Use the seeded user token to act as the external user. Invite the user and your app's bot to a channel with `conversations.invite`, then post a message mentioning the bot. The app-mention event includes the author's `user_team` and `source_team`; the outer `team_id` identifies the receiving installation workspace selected by the token, which defaults to the emulated workspace. Ordinary message callbacks retain the author user ID, which can be resolved with `users.info`.
- A channel with external members returns `is_ext_shared: true` and `is_shared: true`; its event callbacks include `is_ext_shared_channel: true`. Seed `channels[].is_ext_shared: true` to model an already shared channel. Sharing remains set after the last external member leaves or is removed, including across saved state. Slack Connect invitation and approval flows, workspace disconnection, and per-workspace channel settings are not simulated.
- ### Event retries
- Use `POST /_slack/simulate/event-retry` with an authenticated emulator token and JSON `{ "event_id": "Ev...", "reason": "http_timeout" }` to test event deduplication. Get the event ID from a received callback or the inspector's Events tab. The simulator resends the latest recorded delivery for that event to its original subscription, preserving the entire payload and event ID. If several subscribers received it, only the latest recipient is retried.
- Each attempt gets an increasing `X-Slack-Retry-Num`, starting at `1`, and `X-Slack-Retry-Reason` (default `http_timeout`). Reasons also accept `http_error`, `connection_failed`, `ssl_error`, `too_many_redirects`, and `unknown_error`. When `slack.signing_secret` is configured, the retry gets a fresh request timestamp and signature. The response includes `delivery_id`, `retry_num`, `success`, and `status_code`; a failed callback is recorded and still consumes a retry number.
- Retries are explicit, with no automatic scheduling or three-attempt limit. Only the latest 1,000 event deliveries are retained in memory, so retries are unavailable after their history is evicted or the emulator restarts. Unknown events return `event_not_found`, and an inactive subscription returns `subscription_inactive`.
- ### Interactivity
- Buttons and modal submissions can invoke your app's Interactivity Request URL. Configure `interactivity_url` on a seeded `slack.oauth_apps` entry and set `slack.signing_secret` to the same secret used by your receiver:
- ```yaml
- slack:
- signing_secret: local-signing-secret
- oauth_apps:
- - app_id: A_MY_APP
- client_id: my-client
- client_secret: my-secret
- name: My App
- redirect_uris: []
- interactivity_url: http://localhost:3000/slack/interactions
- ```
- - `POST /_slack/simulate/block-actions` accepts `channel`, `message_ts`, and a button selector (`action_id`, exact `text`, or `url`), plus the acting `user` ID or name. It supports buttons in actions blocks and section accessories, including ephemeral messages visible to that user. The simulator requires an authenticated emulator token and the acting user must belong to the conversation.
- - `POST /_slack/simulate/view-submission` accepts `view_id`, optional `user`, and `values` keyed by input block ID. Text inputs take strings; static selects and radio buttons take an option value; multi-selects and checkboxes take arrays of option values. Omitted values retain previous input or initial values. Other input elements return `unsupported_element`.
- Callbacks are `application/x-www-form-urlencoded` with one `payload` JSON field, signed over the exact encoded request body. Button payloads include an app-bound, single-use `trigger_id` that can open a modal for the acting user. App ownership is preserved for messages posted with an app's bot or user token. Simulators return the payload and `delivery_id`; attempts and delivery results are saved in `slack.interaction_deliveries`.
- A button payload's `response_url` accepts JSON without a bearer token, up to five times within 30 minutes. It posts an ephemeral reply by default, or a public reply with `response_type: "in_channel"`. Use `replace_original: true` or `delete_original: true` to modify the source message. Replacement retains the source message's visibility. Rich blocks and thread replies are supported.
- A modal receiver must acknowledge within three seconds. An empty HTTP 200 closes the submitted view, while `response_action: "clear"` closes its stack. `errors` retains the view and returns block errors; `update` replaces its contents; `push` adds a new view subject to the three-view limit. Delivery failures and invalid acknowledgements leave the modal open. Shortcuts, slash commands, non-button actions, `view_closed`, and `block_suggestion` are not simulated.
- ### OAuth
- - `GET /oauth/v2/authorize` - authorization (shows user picker)
- - `POST /oauth/v2/authorize/callback` - local user picker callback that creates the auth code
- - `POST /api/oauth.v2.access` - token exchange
- - `POST /api/apps.uninstall` - uninstall an app and revoke its workspace tokens
- `POST /api/apps.uninstall` accepts `client_id`, `client_secret`, and an installation's user token in the Authorization header or POST `token` field. It removes that app's installation in the token's workspace and revokes all associated OAuth bot and user tokens, including earlier grants. Revoked credentials return `token_revoked` on Web API calls even with permissive authentication. Other apps and workspaces keep their credentials. Granular bot tokens cannot uninstall an app and return `no_permission`; configured development tokens without an app binding may uninstall a local installation. No method scope is required.
- Uninstall dispatches `app_uninstalled` and `tokens_revoked` to matching event subscriptions with the removed app's `api_app_id`. `tokens_revoked.tokens.oauth` and `.bot` contain deduplicated user IDs, never token strings. Credentials are invalid before callbacks are delivered. Handlers should accept either event order. The app definition remains available for a new OAuth installation; reinstalling issues fresh tokens without reactivating revoked ones.
- ### Inspector
- - `GET /` - tabbed local inspector for conversations, messages, files, views, auth records, incoming webhooks, event subscriptions, and event deliveries
- When a supported Slack write emits an `event_callback`, the payload contains the inner `event` plus outer `token`, `api_app_id`, `authorizations`, `team_id`, `event_id`, and `event_time`. The team comes from the presented Slack token's installation; development tokens without a stored Slack record fall back to the affected channel, user, or file's team, then the seeded workspace team (or `T000000001`). Incoming webhook posts use their webhook record's team, or the target channel's team when no record matches. `event_time` is an integer Unix timestamp in seconds. Each logical event gets a new `event_id`, shared across deliveries to multiple subscribers.
- Callbacks identify each workspace installation with its recipient `api_app_id` and bot authorization. With multiple installed apps, each receives a separate envelope; configured webhook subscriptions are shared and can route by `api_app_id`. Without an installation, callbacks use `A000000001` and a local user authorization. The legacy `token` field defaults to `emulate-verification-token`; set `slack.verification_token` to match receivers that check it. Use `slack.signing_secret` for request signature verification.
- Every inner event includes `event_ts`. Message events include `channel_type` (`channel`, `group`, `im`, or `mpim`). Posts made with an issued or seeded bot token include the bot's `bot_id`, `app_id`, and `bot_profile` when the corresponding bot record exists. These fields persist in history, replies, and updates so handlers can identify their own messages. Removing an installed bot with `conversations.kick` or `conversations.leave` also emits `channel_left` or `group_left`, with `actor_id` and `event_ts`, for the affected app.
- To test bot handlers, invite an installed app's `bot_user_id` with `conversations.invite`, subscribe to `app_mention`, then post text containing `<@BOT_USER_ID>` with `chat.postMessage`. Channel mentions produce one callback per mentioned app, with outer `api_app_id`, inner `event_ts`, and the original message and thread identity. DMs and MPIMs use `message` events.
- Slack scope checks are relaxed by default so local tests can use simple bearer tokens. Set `slack.strict_scopes: true` in seed config to make supported Web API methods return Slack-style `missing_scope` errors with `needed` and `provided` fields. Strict mode checks `chat:write`, `channels:read`, `channels:history`, `channels:join`, `channels:manage`, `channels:write`, `groups:read`, `groups:history`, `groups:write`, `im:read`, `im:history`, `im:write`, `mpim:read`, `mpim:history`, `mpim:write`, `users:read`, `users:read.email`, `users.profile:read`, `users.profile:write`, `users:write`, `files:read`, `files:write`, `pins:read`, `pins:write`, `bookmarks:read`, `bookmarks:write`, `reactions:read`, `reactions:write`, `team:read`, and `admin.conversations:write`. Slack lists no method-specific scopes for `views.publish`, `views.open`, `views.update`, or `views.push`, so the emulator requires auth but does not add strict-scope checks for those methods. Strict mode also rejects tokens the emulator did not issue: a token that does not come from seed config, server options, or an OAuth exchange returns `invalid_auth` instead of acting as the default user.
- Current Slack limits: Slack Connect invitation and approval flows, per-workspace channel settings, other Enterprise Grid admin APIs, Audit Logs API, SCIM, Legal Holds, Socket Mode, slash commands, shortcuts, and interaction types other than button actions and modal submissions, user groups, reminders, stars, calls, canvases, lists, functions, workflows, chat streaming, legacy `files.upload`, exact rate limiting, and paid-plan behavior are not implemented.
- ## Resend API
- ### Recipient restrictions and send attempts
- Set `resend.allowlist` in seed config to test recipient rejection:
- ```yaml
- resend:
- allowlist:
- - allowed@example.com
- - copy@example.com
- ```
- Omitting `allowlist` accepts every recipient; `allowlist: []` rejects every recipient. Every address in `to`, `cc`, and `bcc` must be listed. Matching ignores surrounding whitespace and letter case; entries are individual addresses, with no wildcard or domain matching. This is a local testing control, independent of Resend's domain verification and account restrictions.
- A rejected send returns `403 validation_error` naming the rejected addresses and configured allowlist. No email ID, email record, idempotency record, or webhook is created. A batch is rejected as a whole if any recipient is disallowed. Retrying a rejected request, even with the same idempotency key, creates a new attempt. Replaying an accepted idempotent request returns its original response even if the allowlist has since changed.
- Validated sends append one record per email to the `resend.send_attempts` store collection, including emails in a rejected batch. Each record contains `from`, `to`, `cc`, `bcc`, `subject`, `idempotency_key` (or `null`), and the store's `id`, `created_at`, and `updated_at`. Message bodies are not copied into attempts. Malformed requests, invalid or conflicting idempotency keys, and idempotency replays do not append attempts.
- Read attempts with `getResendStore(store).sendAttempts.all()` from `@emulators/resend`, or inspect the persisted state. Shared adapter snapshots use the key `resend:resend.send_attempts`. Attempts and recipient restrictions survive saved-state restoration, including rejected sends. There is no additional Resend API endpoint for attempts. A rejected send has an attempt without an email; a send that never happened has neither.
- ## Linear API
- Stateful Linear GraphQL API emulation with seeded organizations, users, teams, workflow states, issues, comments, labels, projects, cycles, OAuth apps, tokens, webhooks, and agent sessions. GraphQL reads and writes mutate in-memory state and use Relay-style connections with opaque cursors. OAuth supports authorization code, PKCE, refresh token, revoke, client credentials, and `actor=app` tokens for local app-actor tests. Supported writes dispatch Linear-shaped webhook payloads with `Linear-Delivery`, `Linear-Event`, `Linear-Timestamp`, and `Linear-Signature` headers when webhooks are configured.
- ### GraphQL
- - `POST /graphql` - GraphQL endpoint for queries and mutations
- - `GET /graphql` - query-string GraphQL endpoint for tooling
- - Queries: `viewer`, `organization`, `users`, `user`, `teams`, `team`, `workflowStates`, `workflowState`, `issues`, `issue`, `comments`, `comment`, `issueLabels`, `issueLabel`, `projects`, `project`, `cycles`, `cycle`, `webhooks`, `webhook`, `agentSessions`, `agentSession`, `agentActivities`, `agentActivity`
- - Mutations: `issueCreate`, `issueUpdate`, `issueDelete`, `issueArchive`, `issueUnarchive`, `commentCreate`, `commentUpdate`, `commentDelete`, `issueLabelCreate`, `issueLabelUpdate`, `issueLabelDelete`, `issueAddLabel`, `issueRemoveLabel`, `webhookCreate`, `webhookDelete`, `agentSessionCreateOnIssue`, `agentSessionCreateOnComment`, `agentSessionUpdate`, `agentSessionUpdateExternalUrl`, `agentActivityCreate`
- Issue selections expose both numeric `priority` and Linear's derived `priorityLabel` values: `No priority`, `Urgent`, `High`, `Medium`, and `Low`.
- ### OAuth
- - `GET /oauth/authorize` - authorization endpoint with local user picker
- - `POST /oauth/authorize/callback` - local user picker callback that creates an authorization code
- - `POST /oauth/token` - authorization code, refresh token, and client credentials grants
- - `POST /oauth/revoke` - revoke access or refresh tokens
- OAuth app `actor` config is authoritative. Apps configured with `actor: user` use authorization code flows. Apps configured with `actor: app` use the app install flow and can request client credentials tokens.
- ### Agent Sessions
- Agent sessions follow Linear's Agent Interaction API, so `@linear/sdk` agent code runs against the emulator with an app actor token. `agentActivityCreate` takes `AgentActivityCreateInput` (`agentSessionId`, a typed `content` object, `ephemeral`, `signal`, `signalMetadata`) and validates it as Linear does. `AgentActivity.content` is the `AgentActivityContent` union, and session `status` follows the latest activity. `agentSessionUpdate` sets plans, summaries, and external links. Webhooks subscribed to `AgentSessionEvent` receive `created` events with `promptContext` and `prompted` events with the prompt activity, in Linear's `AgentSessionEventWebhookPayload` shape. A human token can create `prompt` activities to simulate user messages. The earlier flat input `{ sessionId, type, body }` still works.
- ### Webhooks And Inspector
- - `webhookCreate` / `webhookDelete` manage local webhook subscriptions
- - `GET /` - tabbed local inspector for issues, teams, users, projects, agents, auth records, webhook subscriptions, and deliveries
- Linear scope checks are relaxed by default so local tests can use simple bearer tokens or the seeded `lin_test_admin` token. Set `linear.strict_scopes: true` in seed config to require `read`, `write`, `issues:create`, `comments:create`, or `admin` on supported GraphQL operations.
- Current Linear limits: full schema coverage, exact production rate limiting, notification inbox behavior, rich document APIs, customer APIs, initiative APIs, exact search relevance, archiving agent sessions and activities, session dismissal by users, agent guidance, repository suggestions, and routing `AgentSessionEvent` webhooks to the owning app alone are not implemented.
- ## Twilio API
- Stateful Twilio REST emulation with seeded accounts, Auth Tokens, API keys, incoming phone numbers, Programmable Messaging, Messaging Services, Verify, basic Voice calls, Conversations REST resources, signed webhooks, local simulator routes, and an inspector. No real SMS, MMS, WhatsApp, email, voice, carrier, compliance, billing, or SendGrid traffic is performed.
- Default local credentials:
- ```text
- TWILIO_ACCOUNT_SID=AC00000000000000000000000000000000
- TWILIO_AUTH_TOKEN=twilio_test_auth_token
- TWILIO_API_KEY=SK00000000000000000000000000000000
- TWILIO_API_SECRET=twilio_test_api_secret
- TWILIO_PHONE_NUMBER=+15551234567
- TWILIO_VERIFY_SERVICE_SID=VA00000000000000000000000000000000
- ```
- ### REST Routes
- - `GET /2010-04-01/Accounts/{AccountSid}.json` - fetch account
- - `GET /2010-04-01/Accounts/{AccountSid}/IncomingPhoneNumbers.json` - list phone numbers
- - `POST /2010-04-01/Accounts/{AccountSid}/Messages.json` - create outbound message
- - `GET /2010-04-01/Accounts/{AccountSid}/Messages.json` - list messages
- - `POST /2010-04-01/Accounts/{AccountSid}/Calls.json` - create outbound call
- - `POST /messaging/v1/Services` - create Messaging Service
- - `POST /verify/v2/Services/{ServiceSid}/Verifications` - start verification
- - `POST /verify/v2/Services/{ServiceSid}/VerificationCheck` - check verification code
- - `POST /conversations/v1/Services` - create Conversation Service
- - `POST /conversations/v1/Services/{ServiceSid}/Conversations` - create Conversation
- - `POST /conversations/v1/Services/{ServiceSid}/Conversations/{ConversationSid}/Participants` - add participant
- - `POST /conversations/v1/Services/{ServiceSid}/Conversations/{ConversationSid}/Messages` - add message
- Twilio uses multiple product hosts. For local SDK tests, rewrite Twilio SDK requests to the emulator and map `messaging.twilio.com` to `/messaging`, `verify.twilio.com` to `/verify`, and `conversations.twilio.com` to `/conversations`.
- Only an `active` account can send messages or place calls. Set the seeded account `status` to `suspended` or `closed`, or update it with `POST /2010-04-01/Accounts/{AccountSid}.json` and `Status`, to test the failure: message and call creation return HTTP 401 with error `20005`, "Account not active". Set the status back to `active` to restore them.
- ### SMS And OTP Testing
- For the common SMS verification loop, the seeded Verify Service uses code `123456`. Start a verification through the normal Verify API, then either submit `123456` in your app test or fetch the latest local code with the authenticated helper route:
- ```sh
- curl -u "$TWILIO_ACCOUNT_SID:$TWILIO_AUTH_TOKEN" \
- "http://localhost:4000/_twilio/simulate/verification-code?To=%2B15550002222&ServiceSid=$TWILIO_VERIFY_SERVICE_SID"
- ```
- The helper returns the latest local verification for that phone number, including `verification_sid`, `status`, `attempts`, and `code`. It is local-only test support and is not part of Twilio's production API. The Verify inspector also shows each attempted code.
- To test inbound SMS webhooks, configure a seeded phone number `sms_url`, then call `POST /_twilio/simulate/inbound-message` with `To`, `From`, and `Body`. If the destination number is assigned to a Messaging Service with `inbound_request_url`, the simulator sends the inbound webhook there and includes `MessagingServiceSid`; otherwise it uses the phone number `sms_url`. To test outbound delivery transitions, create a message with `StatusCallback`, then call `POST /_twilio/simulate/message-status`.
- ### Simulator And Inspector
- - `POST /_twilio/simulate/inbound-message` - create an inbound message and invoke the configured SMS webhook
- - `POST /_twilio/simulate/message-status` - advance message status and send status callbacks
- - `GET /_twilio/simulate/verification-code` - fetch the latest local Verify code by `VerificationSid` or `To`
- - `POST /_twilio/simulate/inbound-call` - create an inbound call and invoke the configured voice webhook
- - `POST /_twilio/simulate/call-status` - advance call status
- - `POST /_twilio/simulate/verification-status` - force a verification state by `VerificationSid` or `To`
- - `GET /` - tabbed inspector for messages, Verify, calls, Conversations, phone numbers, services, auth, and webhook deliveries
- Current Twilio limits: no carrier delivery, A2P 10DLC, toll-free verification, real phone number purchasing, exact rate limits, Studio, Flex, TaskRouter, Video, Sync, Segment, SendGrid, Conversations SDK websocket behavior, or complete TwiML interpreter.
- ## AI API
- Deterministic OpenAI Responses, Chat Completions, and Anthropic Messages emulation. Replies are scripted by rules, not generated by a model, so the same request returns the same answer on every run. Text, streaming, structured output, tool loops, reasoning, refusals, stored responses, errors, mid-stream disconnects, and stalls are all available on demand, offline and without keys.
- ### Base URL
- ```bash
- npx emulate start --service ai --port 4014
- ```
- A single selected service otherwise uses the base port, normally 4000. In an all-services run, `ai` listens on port 4014. Point clients at `http://localhost:4014/v1`. Any path prefix works, such as `/v1` or `/api/v1`; the format is selected from the end of the request path. API keys are accepted but never required, stored, or logged. Every generation response carries a deterministic request id: `x-request-id` on the OpenAI routes and `request-id` on the Anthropic Messages route.
- ### Clients
- The official OpenAI SDK reads `OPENAI_BASE_URL`, or you can pass the base URL explicitly:
- ```typescript
- import OpenAI from 'openai'
- const openai = new OpenAI({
- baseURL: 'http://localhost:4014/v1',
- apiKey: 'test',
- })
- const chat = await openai.chat.completions.create({
- model: 'gpt-x',
- messages: [{ role: 'user', content: 'Hi' }],
- })
- const response = await openai.responses.create({
- model: 'gpt-x',
- input: 'Hi',
- })
- ```
- The Vercel AI SDK uses the standard OpenAI provider. `openai(...)` posts to `/responses`; `openai.chat(...)` posts to `/chat/completions`:
- ```typescript
- import { createOpenAI } from '@ai-sdk/openai'
- import { generateText } from 'ai'
- const openai = createOpenAI({
- baseURL: 'http://localhost:4014/v1',
- apiKey: 'test',
- })
- const responses = await generateText({
- model: openai('anthropic/claude-sonnet-5'),
- prompt: 'Hi',
- })
- const chat = await generateText({
- model: openai.chat('gpt-x'),
- prompt: 'Hi',
- })
- ```
- `@ai-sdk/openai-compatible` works in Chat mode against the same base URL. Vercel AI Gateway's OpenAI-compatible `/v1` surface works through either provider, and any model slug is accepted and echoed back. `createOpenAICompatible` sends `json_object` without a schema unless the provider sets `supportsStructuredOutputs: true`, so `generateObject` against the default `{}` reply fails its schema check: set `supportsStructuredOutputs: true`, or script the object with an `object` reply rule. The private `@ai-sdk/gateway` protocol is not supported.
- ### Data routes
- - `POST /v1/chat/completions` - Chat Completions, unary or streamed
- - `POST /v1/responses` - Responses, unary or streamed
- - `POST /v1/messages` - Anthropic Messages, unary or streamed
- - `GET /v1/responses/{id}` - retrieve a stored response
- - `DELETE /v1/responses/{id}` - delete a stored response
- - `GET /v1/models` - list configured and previously requested model ids
- An unsupported data path such as `/v1/embeddings` returns the native 404 naming the supported paths.
- ### Rules
- Rules live under `ai.rules` in seed config or are replaced at runtime. They are evaluated in order and the first match wins. Every supplied matcher must hold. `times` is a per-rule budget consumed on every selection, including injected errors, so an exhausted rule is skipped.
- ```yaml
- ai:
- strict: false
- timing:
- ttftMs: 0
- chunkDelayMs: 0
- models: [gpt-x]
- rules:
- - id: weather-call
- match:
- textContains: weather
- tool: get_weather
- hasToolResult: false
- times: 1
- reply:
- - type: tool_call
- name: get_weather
- arguments:
- city: Paris
- - id: weather-result
- match:
- hasToolResult: true
- reply:
- - type: text
- text: The temperature in Paris is 20 C.
- - id: rate-limit-once
- match: { textContains: retry }
- times: 1
- error:
- status: 429
- message: Injected rate limit. Retry this request.
- headers:
- retry-after: "1"
- ```
- In a project config with a `services:` map, the seed goes under `services.<name>.seed`, not a top-level `ai:` block, which would start a second service named `ai`:
- ```yaml
- services:
- llm:
- emulator: ai
- seed: { rules: [{ id: weather, match: { textContains: weather }, reply: [{ type: text, text: Sunny }] }] }
- ```
- Matchers are `model` (with `*` wildcards), `format` (`openai-chat`, `openai-responses`, or `anthropic-messages`), `stream`, `textContains` (case-sensitive, latest user instruction only, excluding tool results), `tool` (a declared tool, with `*` wildcards), `hasToolResult`, and `file` (`true` for any attachment, including one returned inside a tool result, or a media-type glob). Reply events are `text`, `object` (sent as JSON text), `tool_call`, `reasoning` (a Responses summary or a Messages `thinking` block; Chat has no field for it), and `refusal` (native shape). A rule has one of `reply`, `variants`, or `error`. `finish` and `timing` go with `reply` or `variants`, and `fault` also requires `match: { stream: true }`. A `tool_call` event's `arguments` must be a JSON object; a string is rejected at startup and on `PUT /_ai/rules`. A fault disconnects or stalls a stream after a counted number of content chunks.
- Set `timing.ttftMs` and `timing.chunkDelayMs` globally or per rule. Both default to zero, so replies are instant. `ttftMs` is the wait before the first byte of any reply, streamed or not, and `chunkDelayMs` is the gap between the frames of a stream. Delays are abortable: a client close or reset cancels pending timers.
- Request limits apply to every reply, scripted or default. A stop sequence (`stop` on Chat Completions) cuts the reply text at the first match; the sequence is not returned, nothing after it is sent, and the reply ends with `stop`. On Messages, `stop_sequences` works the same way, and the reply reports `stop_reason: "stop_sequence"` with the match in `stop_sequence`. A token cap (`max_completion_tokens` or `max_tokens` on Chat Completions, `max_output_tokens` on Responses) counts output at one token per four characters, the same estimate the usage numbers use. A reply over the cap is cut there and ends with `length`, which Responses reports as `status: "incomplete"` with `incomplete_details.reason: "max_output_tokens"`. A tool call that does not fit is dropped whole rather than sent partially. On Messages, `max_tokens` is the cap, and a reply over it ends with `stop_reason: "max_tokens"`. A rule's own `finish` still wins when it is set.
- ### Defaults and strict mode
- With no matching rule, the service echoes the latest user text, returns a deterministic schema-valid object when a schema was requested, returns `{}` for JSON mode without a schema, generates a call when a tool is forced, acknowledges a tool result or an attachment-only request, and accepts and echoes any model id.
- Supported schema features are `type`, `properties`, `required`, `enum`, `const`, `items`, numeric and length bounds, `nullable`, the first `anyOf` branch that yields a valid sample, the first `oneOf` branch whose sample matches exactly one branch (the native 400 when none does), and local `$ref`, with recursion bounded. Keywords written next to `$ref`, `anyOf`, or `oneOf` shape the sample as well. A schema outside that subset returns a native 400 naming the schema path. A string with `pattern` is generated only when it also has a common `format` the generator knows; otherwise the request returns the native 400 asking for an explicit reply rule. A format sample, `enum` value, or `const` that fails the pattern returns the same 400, and pattern checks run under a time limit.
- Set `ai.strict: true` to turn every unmatched request into a native 400 naming the model and tools and including the missing rule as YAML and as a JSON body for the rules endpoint.
- ### Stored responses and the call record
- Responses are stored by default so multi-turn sessions and item references resolve. Set `store: false` to skip storage. Unknown `previous_response_id` and item references are treated as empty context, so a request still succeeds. A function call with no matching `function_call_output` returns OpenAI's 400, `No tool output found for function call <id>.`, unless the history it refers to is missing.
- Every generation request is recorded with its format, model, `matched`, normalized prompt and tool arguments, and outcome. `matched` is `{ "id": "<rule id>", "remaining": <budget left or null>, "rule": <the rule as it was when it answered> }` for a rule, `{ "default": "<kind>" }` when a default answered, and `null` when strict mode rejected the request. The last 500 calls are kept. Stored responses are capped at the most recent 1000; older ones are evicted. Keys, auth headers, and file bytes are never recorded. Attachment metadata records the name, media type, size, and hash only.
- ### Control routes and inspector
- All control routes and the inspector are same-origin only, reads included. curl and tests without an `Origin` header work; a browser page from another origin gets 403. Data routes accept SDK and server calls, which send no `Origin`, and browser pages served on this machine (`localhost`, `*.localhost`, `127.0.0.1`, `[::1]`); a page on any other website gets 403. Startup warns when the service listens beyond loopback. The AI service also checks the request's own host, so a website whose name is rebound to this machine cannot read it: it answers only on loopback names, IP addresses, and the host of its base URL, and any other name gets 403. To allow another name, such as a Docker service name, start with `--base-url http://<host>:<port>`. When embedded through `createEmulateHandler`, set `publicUrl` to the public origin.
- - `GET /_ai/calls` - recorded calls
- - `DELETE /_ai/calls` - clear the call record
- - `GET /_ai/rules` - active rules with remaining budgets
- - `PUT /_ai/rules` - replace the active rules without restarting
- - `POST /_ai/reset` - restore seeded rules and budgets, and clear calls and stored responses
- - `GET /` - read-only inspector with Calls and Rules tabs
- `GET /_ai/calls` returns a bare JSON array, oldest first. `DELETE /_ai/calls` returns `{ "deleted": <count> }`. `GET /_ai/rules` and `PUT /_ai/rules` return `{ "rules": [...], "strict": <bool>, "timing": {...}, "random": { "seed": <number> }, "models": [...] }` with each rule's `remaining` budget (`null` means unlimited), in the shape `PUT` accepts. `POST /_ai/reset` returns `{ "reset": true }`.
- ```bash
- curl -s http://localhost:4014/_ai/calls | jq
- curl -X PUT http://localhost:4014/_ai/rules \
- -H "Content-Type: application/json" \
- -d '{
- "rules": [
- {
- "id": "hello",
- "match": { "textContains": "Hi" },
- "reply": [{ "type": "text", "text": "Hello from emulate." }]
- }
- ]
- }'
- ```
- An invalid replacement returns 400 with the failing path and leaves the previous rules active. `PUT` replaces the whole runtime config, so include `strict`, `timing`, `random`, and `models` in the body to keep them; a body with only `rules` resets them to their defaults, and a reset seed changes the order of seeded variants. Every replacement also restores each rule's full `times` budget. Runtime replacements are ephemeral: reset restores the seeded rules.
- ### Refusals, attachments, and limits
- A refusal rule produces OpenAI's native refusal shape only when a rule asks for one. The AI SDK cannot parse it: `@ai-sdk/openai` 3.x and 4.x reject a native Responses refusal part in non-streaming mode with a parse error and drop it when streaming, and Chat parsing omits `refusal`. Test native refusal handling with the official `openai` SDK; for app behavior through the AI SDK, script the same user-visible content as `text`.
- Attachments are input only. The emulator never reads their contents to produce an answer; rules decide the reply. Inline bytes are hashed, measured, and dropped. Responses accepts `input_file` with inline data, a URL, or a file id, plus `input_image`. Chat accepts `file` parts with inline data or a file id, and `image_url`; Chat files must be PDFs and Chat does not accept file URLs. Malformed inline data returns a native 400. The AI SDK validates attachments before sending, so `@ai-sdk/openai` rejects `text/plain` and other non-PDF, non-image files client-side unless `passThroughUnsupportedFiles` is set.
- On the OpenAI routes, result-changing features outside this version return a native 400 naming the feature: hosted tools, custom tools, allowed tool choice, background mode, the Conversations API, multiple candidates, audio input, audio output, and legacy functions.
- On the Messages route, tools carry `input_schema`, except Anthropic-defined client tools (bash, text editor, computer use, memory), which are accepted by name without one. Server-side tools (web search, web fetch, code execution, tool search, MCP toolset) return a 400. A base64 image source must be `image/jpeg`, `image/png`, `image/gif`, or `image/webp`, and a base64 document source must be `application/pdf`. Messages errors use Anthropic's envelope, and a validation error starts with the failing field, as in `max_tokens: Expected a number.` Unsupported paths under `/v1/messages`, such as `count_tokens`, and any request with an `anthropic-version` header get a `not_found_error` in the same envelope.
- Paths with no route return the native 404 naming the supported paths: Gemini, embeddings, image generation, file uploads, input item listing, token counting, and response cancellation.
- Accepted and ignored, with no effect on replies: OpenRouter `reasoning` fields and unknown optional fields. Reply text is sent as written with no templating.
- ## Apple Sign In
- Sign in with Apple emulation with authorization code flow, PKCE support, RS256 ID tokens, and OIDC discovery.
- - `GET /.well-known/openid-configuration` - OIDC discovery document
- - `GET /auth/keys` - JSON Web Key Set (JWKS)
- - `GET /auth/authorize` - authorization endpoint (shows user picker)
- - `POST /auth/token` - token exchange (authorization code and refresh token grants)
- - `POST /auth/revoke` - token revocation
- ## Microsoft Entra ID
- Microsoft Entra ID (Azure AD) v2.0 OAuth 2.0 and OpenID Connect emulation with authorization code flow, PKCE, client credentials, client-bound refresh tokens, RS256 ID tokens, and OIDC discovery.
- - `GET /.well-known/openid-configuration` - OIDC discovery document
- - `GET /:tenant/v2.0/.well-known/openid-configuration` - tenant-scoped OIDC discovery
- - `GET /discovery/v2.0/keys` - JSON Web Key Set (JWKS)
- - `GET /oauth2/v2.0/authorize` - authorization endpoint (shows user picker)
- - `POST /oauth2/v2.0/token` - token exchange (authorization code, refresh token, client credentials)
- - `GET /oidc/userinfo` - OpenID Connect user info
- - `GET /v1.0/me` - Microsoft Graph user profile
- - `GET /oauth2/v2.0/logout` - end session / logout
- - `POST /oauth2/v2.0/revoke` - token revocation
- Refresh token requests must include the `client_id` and `client_secret` of the client that received the token. Refresh tokens rotate after successful use. Legacy refresh records without a stored client binding remain supported.
- ```bash
- curl -X POST http://localhost:4005/oauth2/v2.0/token \
- -H "Content-Type: application/x-www-form-urlencoded" \
- -d "refresh_token=r_microsoft_...&\
- client_id=example-client-id&\
- client_secret=example-client-secret&\
- grant_type=refresh_token"
- ```
- ## AWS
- S3, SQS, Cognito, IAM, STS, and KMS emulation with AWS SDK-compatible S3 paths. S3 uploads and downloads preserve arbitrary binary payloads, including raw byte lengths and ETags. SQS supports AWS JSON 1.0 and XML Query protocols; IAM and STS use XML Query; KMS uses AWS JSON 1.1.
- ### S3
- S3 routes use root paths matching the real AWS S3 wire format, so the official AWS SDK works out of the box with `forcePathStyle: true`. Legacy `/s3/` prefixed paths are also supported for backward compatibility.
- - `GET /` - list all buckets
- - `PUT /:bucket` - create bucket
- - `DELETE /:bucket` - delete bucket
- - `HEAD /:bucket` - check existence
- - `GET /:bucket` - list objects (prefix, delimiter, max-keys, continuation-token, start-after)
- - `POST /:bucket` - presigned POST upload (browser-style multipart form with policy validation)
- - `PUT /:bucket/:key` - put object (supports copy via `x-amz-copy-source`)
- - `GET /:bucket/:key` - get object
- - `HEAD /:bucket/:key` - head object
- - `DELETE /:bucket/:key` - delete object
- ### SQS
- Current AWS SDK clients work with the `/sqs` endpoint:
- ```typescript
- import { SQSClient, ListQueuesCommand } from "@aws-sdk/client-sqs";
- const sqs = new SQSClient({
- endpoint: "http://localhost:4007/sqs",
- region: "us-east-1",
- credentials: {
- accessKeyId: "AKIAIOSFODNN7EXAMPLE",
- secretAccessKey: "wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY",
- },
- });
- await sqs.send(new ListQueuesCommand({}));
- ```
- SQS accepts AWS JSON 1.0 requests at `POST /sqs/` with `Content-Type: application/x-amz-json-1.0` and `X-Amz-Target: AmazonSQS.<Action>`, returning JSON results and errors. XML Query requests with an `Action` form parameter remain supported. Queue operations also accept the returned `QueueUrl` as the endpoint.
- Supported operations:
- - `CreateQueue`, `ListQueues`, `GetQueueUrl`, `GetQueueAttributes`
- - `SendMessage`, `ReceiveMessage`, `DeleteMessage`
- - `PurgeQueue`, `DeleteQueue`
- ### IAM
- All operations via `POST /iam/` with `Action` parameter:
- - `CreateUser`, `GetUser`, `ListUsers`, `DeleteUser`
- - `CreateAccessKey`, `ListAccessKeys`, `DeleteAccessKey`
- - `CreateRole`, `GetRole`, `ListRoles`, `DeleteRole`
- ### Cognito
- Use `CognitoIdentityProviderClient` with endpoint `/cognito-idp` and `CognitoIdentityClient` with `/cognito-identity`. Both accept AWS JSON 1.1 and work with the official AWS SDK v3:
- ```typescript
- import { CognitoIdentityProviderClient, InitiateAuthCommand } from "@aws-sdk/client-cognito-identity-provider";
- const cognito = new CognitoIdentityProviderClient({
- endpoint: "http://localhost:4007/cognito-idp",
- region: "us-east-1",
- credentials: { accessKeyId: "local-access-key", secretAccessKey: "local-secret" },
- });
- const result = await cognito.send(new InitiateAuthCommand({
- ClientId: "emulateclient",
- AuthFlow: "USER_PASSWORD_AUTH",
- AuthParameters: { USERNAME: "developer", PASSWORD: "LocalPass123!" },
- }));
- ```
- A default User Pool `us-east-1_emulate`, public app client `emulateclient`, and Identity Pool `us-east-1:00000000-0000-4000-8000-000000000001` are created without users. Seed a confirmed account for the example above:
- ```yaml
- aws:
- cognito:
- user_pools:
- - id: us-east-1_emulate
- confirmation_code: "123456"
- users:
- - username: developer
- password: LocalPass123!
- attributes:
- email: dev@example.com
- email_verified: "true"
- name: Developer
- ```
- User pools also accept `name` and `clients` with `client_id`, optional `client_secret`, exact `redirect_uris`, and allowed `scopes`. Users accept `status` (`CONFIRMED`, `UNCONFIRMED`, or `FORCE_CHANGE_PASSWORD`) and `enabled`. Passwords require at least eight characters and are stored as salted hashes. Confidential clients require Cognito's HMAC `SecretHash` or `SECRET_HASH` for SDK flows.
- - `SignUp`, `ConfirmSignUp`, `ResendConfirmationCode`, `ForgotPassword`, and `ConfirmForgotPassword` model account confirmation and recovery. Codes expire after ten minutes and use the pool's `confirmation_code` fixture, default `123456`. No email or SMS is sent. Inspect active codes at `/_inspector?tab=cognito`; seeded unconfirmed users can request a code with `ResendConfirmationCode`.
- - `InitiateAuth` supports `USER_PASSWORD_AUTH`, `REFRESH_TOKEN_AUTH`, and `REFRESH_TOKEN`. `AdminInitiateAuth` also supports `ADMIN_USER_PASSWORD_AUTH`. Admin-created temporary passwords return `NEW_PASSWORD_REQUIRED`, completed with `RespondToAuthChallenge` or `AdminRespondToAuthChallenge`. Challenge sessions expire after three minutes and are bound to the user and client.
- - `GetUser`, `ChangePassword`, `GlobalSignOut`, and `RevokeToken` use issued tokens. `AdminCreateUser` (with `TemporaryPassword`), `AdminGetUser`, `AdminConfirmSignUp`, `AdminSetUserPassword`, `AdminEnableUser`, `AdminDisableUser`, `AdminDeleteUser`, and paginated `ListUsers` support test setup and administration.
- Tokens are RS256 JWTs with Cognito `token_use` claims. ID tokens identify the app client in `aud`; access tokens use `client_id`. ID and access tokens expire after one hour; refresh tokens after thirty days. Sign-out, revocation, disabling, deletion, and password resets invalidate affected sessions. Users, sessions, identities, and signing keys participate in snapshots, restore, and reset.
- The local issuer is `http://localhost:4007/cognito-idp/USER_POOL_ID`. Discovery and public keys are served at `ISSUER/.well-known/openid-configuration` and `ISSUER/.well-known/jwks.json`. Configure token verifiers with this local issuer and JWKS. `ISSUER/oauth2/authorize` presents a local user picker, `ISSUER/oauth2/token` exchanges authorization codes or refresh tokens, and `ISSUER/oauth2/userInfo` returns scoped profile claims. Authorization codes expire after five minutes, are single-use, and bind the client, exact redirect URI, and optional S256 PKCE challenge. Client authentication accepts `client_secret_basic` or `client_secret_post`. The default client permits `http://localhost:3000/callback`.
- Identity Pools support `GetId` and `GetCredentialsForIdentity`. Supply the ID token in `Logins` under `cognito-idp.REGION.amazonaws.com/USER_POOL_ID`. The default Identity Pool accepts the default User Pool and app client. Custom `aws.cognito.identity_pools` entries take `id`, optional `name`, `providers: [{ user_pool_id, client_id }]`, and `allow_unauthenticated_identities` (default `false`). Identities remain stable for the same authenticated subject. Credentials expire after one hour; login signatures, expiry, audience, and identity ownership are checked.
- SRP, MFA, external identity providers, Lambda triggers, pool/client management APIs, `ListUsers` filters, and Identity Pool role selection are not simulated. Administrative requests follow the AWS emulator's permissive credential behavior: SigV4 signatures and IAM policies are not evaluated. Identity Pool credentials are generated test credentials, without role or policy evaluation.
- ### STS
- All operations via `POST /sts/` with `Action` parameter:
- - `GetCallerIdentity`, `AssumeRole`, `AssumeRoleWithWebIdentity`
- `AssumeRoleWithWebIdentity` exchanges an OpenID Connect ID token for temporary credentials. The request needs no signature or `Authorization` header, so `STSClient` works with the `/sts` endpoint and no credentials. The role must exist: seed it with `aws.iam.roles` or create it with `CreateRole`. An unknown role ARN returns `AccessDenied` (403). The token's `iss`, `sub`, and `aud` claims become `Provider`, `SubjectFromWebIdentityToken`, and `Audience`. A token that is not a JWT returns `InvalidIdentityToken`, and a token whose `exp` has passed returns `ExpiredToken`. With `ProviderId`, the token is treated as an opaque OAuth 2.0 access token. `DurationSeconds` defaults to 3600 and accepts 900 through 43200. Token signatures, IAM OIDC providers, role trust policies, session policies, and the role's maximum session duration are not evaluated.
- ### KMS
- KMS accepts AWS JSON 1.1 requests at `POST /kms/` with `Content-Type: application/x-amz-json-1.1` and `X-Amz-Target: TrentService.<Action>`, returning JSON results and `__type` errors. Use `KMSClient` with endpoint `/kms`.
- - `CreateKey`, `DescribeKey`, `ListKeys`, `Encrypt`, `Decrypt`
- Every `KeyId` accepts a key ID, key ARN, alias name (`alias/...`), or alias ARN. `Encrypt` and `Decrypt` responses return the key ARN as `KeyId`. A default key with alias `alias/emulate-default` is always created. Seed more keys under `aws.kms.keys`; each entry takes an optional `key_id` (a lowercase UUID), `description`, and `aliases`. Plaintext is limited to 4096 bytes. A ciphertext blob records the key that produced it, so `Decrypt` needs no `KeyId`, and a `KeyId` naming a different key returns `IncorrectKeyException`. The encryption context is authenticated: decrypting with a different context or a modified blob returns `InvalidCiphertextException`. Unknown keys and aliases return `NotFoundException`, and `DryRun` returns `DryRunOperationException`. Only symmetric `ENCRYPT_DECRYPT` keys are emulated; other key specs, key usages, origins, and multi-Region keys return `UnsupportedOperationException`. Aliases come from seed config, and seeding an alias that already points at another key, such as `alias/emulate-default`, fails at startup. Alias management, key state changes, key policies, grants, rotation, and data key generation are not implemented, and request signatures are not checked.
- ### External backend
- Set `aws.backend.url` to forward S3, SQS, IAM, STS, and KMS to an AWS-compatible endpoint, such as [AWS Emulator](https://github.com/aws/aws-emulator) started with `--auth off`. The URL cannot include credentials: URLs with userinfo are rejected at startup. Cognito and the inspector stay local, and clients keep using the emulator's port and path prefixes. Seeded buckets, queues, IAM users and roles, and KMS keys are created on the backend once per emulator start; a failed seed is retried on the next forwarded request. See the [AWS docs](https://emulate.dev/aws#external-backend).
- ## Next.js Integration
- Embed emulators directly in your Next.js app so they run on the same origin. This solves the Vercel preview deployment problem where OAuth callback URLs change with every deployment.
- ### Install
- ```bash
- npm install @emulators/adapter-next @emulators/github @emulators/google
- ```
- Only install the emulators you need. Each `@emulators/*` package is published independently.
- ### Route handler
- Create a catch-all route that serves emulator traffic:
- ```typescript
- // app/emulate/[...path]/route.ts
- import { createEmulateHandler } from '@emulators/adapter-next'
- import * as github from '@emulators/github'
- import * as google from '@emulators/google'
- export const { GET, POST, PUT, PATCH, DELETE } = createEmulateHandler({
- services: {
- github: {
- emulator: github,
- seed: {
- users: [{ login: 'octocat', name: 'The Octocat' }],
- repos: [{ owner: 'octocat', name: 'hello-world', auto_init: true }],
- },
- },
- google: {
- emulator: google,
- seed: {
- users: [{ email: 'test@example.com', name: 'Test User' }],
- },
- },
- },
- })
- ```
- GitHub App seeds may omit `private_key`. Retain the handler to call server-only `generatedSecrets()`; explicit keys are excluded. Persisted snapshots contain generated keys, so keep the backend private.
- ### Auth.js / NextAuth configuration
- Point your provider at the emulator paths on the same origin:
- ```typescript
- import GitHub from 'next-auth/providers/github'
- const baseUrl = process.env.VERCEL_URL
- ? `https://${process.env.VERCEL_URL}`
- : 'http://localhost:3000'
- GitHub({
- clientId: 'any-value',
- clientSecret: 'any-value',
- authorization: { url: `${baseUrl}/emulate/github/login/oauth/authorize` },
- token: { url: `${baseUrl}/emulate/github/login/oauth/access_token` },
- userinfo: { url: `${baseUrl}/emulate/github/user` },
- })
- ```
- No `oauth_apps` need to be seeded. When none are configured, the emulator skips `client_id`, `client_secret`, and `redirect_uri` validation.
- ### Font files in serverless
- Emulator UI pages use bundled fonts. Wrap your Next.js config to include them in the serverless trace:
- ```typescript
- // next.config.mjs
- import { withEmulate } from '@emulators/adapter-next'
- export default withEmulate({
- // your normal Next.js config
- })
- ```
- If you mount the catch-all at a custom path, pass the matching prefix:
- ```typescript
- export default withEmulate(nextConfig, { routePrefix: '/api/emulate' })
- ```
- ### Persistence
- By default, emulator state is in-memory and resets on every cold start. To persist state across restarts, pass a `persistence` adapter:
- ```typescript
- import { createEmulateHandler } from '@emulators/adapter-next'
- import * as github from '@emulators/github'
- const kvAdapter = {
- async load() { return await kv.get('emulate-state') },
- async save(data: string) { await kv.set('emulate-state', data) },
- }
- export const { GET, POST, PUT, PATCH, DELETE } = createEmulateHandler({
- services: { github: { emulator: github } },
- persistence: kvAdapter,
- })
- ```
- For local development, `@emulators/core` ships `filePersistence`:
- ```typescript
- import { filePersistence } from '@emulators/core'
- // ...
- persistence: filePersistence('.emulate/state.json'),
- ```
- The persistence adapter loads on cold start and saves after mutations. Generated identities also require atomic create-or-read `initialize`; see `@emulators/core`.
- ## Nuxt Integration
- Embed emulators directly in your Nuxt app so they run on the same origin. This gives OAuth flows stable callback URLs in local and preview deployments.
- ### Install
- ```bash
- npm install @emulators/adapter-nuxt @emulators/github @emulators/google
- ```
- Only install the emulators you need. Each `@emulators/*` package is published independently.
- ### Server route
- Create a named catch-all route that serves emulator traffic:
- ```typescript
- // server/routes/emulate/[...path].ts
- import { createEmulateHandler } from '@emulators/adapter-nuxt'
- import * as github from '@emulators/github'
- import * as google from '@emulators/google'
- export default defineEventHandler(createEmulateHandler({
- services: {
- github: {
- emulator: github,
- seed: {
- users: [{ login: 'octocat', name: 'The Octocat' }],
- repos: [{ owner: 'octocat', name: 'hello-world', auto_init: true }],
- },
- },
- google: {
- emulator: google,
- seed: {
- users: [{ email: 'test@example.com', name: 'Test User' }],
- },
- },
- },
- }))
- ```
- GitHub App seeds may omit `private_key`. Retain the handler to call server-only `generatedSecrets()`; explicit keys are excluded. Persisted snapshots contain generated keys, so keep the backend private.
- ### Nuxt config
- Emulator UI pages use bundled fonts. Wrap your Nuxt config so Nitro traces the core package assets into production builds:
- ```typescript
- // nuxt.config.ts
- import { withEmulate } from '@emulators/adapter-nuxt'
- export default defineNuxtConfig(withEmulate({
- // your normal Nuxt config
- }))
- ```
- ### OAuth configuration
- Point your OAuth provider at the emulator paths on the same origin:
- ```typescript
- const baseUrl = process.env.NUXT_PUBLIC_SITE_URL ?? 'http://localhost:3000'
- export const githubOAuth = {
- clientId: 'any-value',
- clientSecret: 'any-value',
- authorizationUrl: `${baseUrl}/emulate/github/login/oauth/authorize`,
- tokenUrl: `${baseUrl}/emulate/github/login/oauth/access_token`,
- userInfoUrl: `${baseUrl}/emulate/github/user`,
- }
- ```
- No `oauth_apps` need to be seeded. When none are configured, the emulator skips `client_id`, `client_secret`, and `redirect_uri` validation.
- ### Persistence
- By default, emulator state is in-memory and resets on every cold start. To persist state across restarts, pass a `persistence` adapter:
- ```typescript
- import { createEmulateHandler } from '@emulators/adapter-nuxt'
- import * as github from '@emulators/github'
- const storageAdapter = {
- async load() { return await useStorage('emulate').getItem<string>('state') },
- async save(data: string) { await useStorage('emulate').setItem('state', data) },
- }
- export default defineEventHandler(createEmulateHandler({
- services: { github: { emulator: github } },
- persistence: storageAdapter,
- }))
- ```
- The persistence adapter loads on cold start and saves after mutations. Generated identities also require atomic create-or-read `initialize`; see `@emulators/core`.
- ## Architecture
- ```
- packages/
- emulate/ # CLI entry point (commander)
- @emulators/
- core/ # HTTP server, in-memory store, plugin interface, middleware
- adapter-next/ # Next.js App Router integration
- adapter-nuxt/ # Nuxt server route integration
- vercel/ # Vercel API service
- github/ # GitHub API service
- google/ # Google OAuth 2.0 / OIDC + Gmail, Calendar, Drive
- slack/ # Slack Web API, OAuth v2, incoming webhooks
- linear/ # Linear GraphQL API, OAuth, webhooks
- twilio/ # Twilio Messaging, Verify, Voice, webhooks
- ai/ # OpenAI Responses, Chat Completions, and Anthropic Messages
- apple/ # Apple Sign In / OIDC
- microsoft/ # Microsoft Entra ID OAuth 2.0 / OIDC + Graph /me
- aws/ # AWS S3, SQS, IAM, STS
- apps/
- web/ # Documentation site (Next.js)
- ```
- The core provides a generic `Store` with typed `Collection<T>` instances supporting CRUD, indexing, filtering, and pagination. Each service plugin registers its routes with the shared internal app and uses the store for state.
- ## Acknowledgments
- The internal HTTP layer builds on [Hono](https://hono.dev)'s API and design. Thank you to Yusuke Wada and the Hono contributors for their work. Hono's copyright and MIT license notice are included in [THIRD_PARTY_NOTICES.md](THIRD_PARTY_NOTICES.md) and distributed with the npm packages.
- ## Auth
- Tokens are configured in the seed config and map to users. Pass them as `Authorization: Bearer <token>` or `Authorization: token <token>`.
- **Vercel**: All endpoints accept `teamId` or `slug` query params for team scoping. Pagination uses cursor-based `limit`/`since`/`until` with `pagination` response objects.
- **GitHub**: Public repo endpoints work without auth. Private repos and write operations require a valid token. A private repository the caller cannot see returns `404 Not Found`, as on GitHub. Set `github.strict_scopes: true` in seed config to reject tokens the emulator did not issue: a token that does not come from seed config, server options, an OAuth exchange, or an installation token request returns `401 Bad credentials` instead of acting as the default user. Pagination uses `page`/`per_page` with `Link` headers.
- **Google**: Standard OAuth 2.0 authorization code flow with RS256-signed OIDC ID tokens. The discovery document advertises RS256 and `/oauth2/v3/certs` returns the RSA public key used to verify issued tokens. Configure clients in the seed config.
- **Slack**: All Web API endpoints require `Authorization: Bearer <token>`. Seeded OAuth apps create local installation records, and OAuth v2 flow with user picker UI creates scoped bot tokens. Optional strict scope mode returns `missing_scope` when a token lacks a required method scope.
- **Linear**: GraphQL accepts `Authorization: Bearer <token>` or a bare personal API key value. Seeded Linear tokens map to users or app actors, OAuth apps support local authorization code and client credentials flows, and optional strict scope mode checks supported GraphQL operations.
- **Twilio**: HTTP Basic auth accepts the seeded Account SID/Auth Token pair or API Key/API Secret pair. Product-host APIs are exposed under local prefixes such as `/messaging/v1` and `/verify/v2`; the 2010 API lives at `/2010-04-01`.
- **AI**: OpenAI-compatible clients accept any API key, or none. Keys are never required, stored, or logged. Control routes and the inspector are same-origin only. Data routes refuse browser pages from other websites.
- **Apple**: OIDC authorization code flow with RS256 ID tokens. On first auth per user/client pair, a `user` JSON blob is included.
- **Microsoft**: OIDC authorization code flow with PKCE support. Also supports client credentials grants. Microsoft Graph `/v1.0/me` available.
- **AWS**: Bearer tokens or IAM access key credentials. Default key pair always seeded: `AKIAIOSFODNN7EXAMPLE` / `wJalrXUtnFEMI/K7MDENG/bPxRfiCYEXAMPLEKEY`.
Ratings and comments
Sign in to rate this skill.
Sign inFree to use. If it’s helped, pass it on.