Skip to content
Back to search

notapad

DIY wearable AI voice recorder: a resin monolith with nRF52840, BLE sync and an open MCP server

Safety scan

A static text scan, not a guarantee. Select the badge to see what was scanned and every finding.

Badge for your README
findsafeskills safety rating

Markdown

[![findsafeskills safety rating](/api/listings/pzero--notapad/badge.svg)](/listings/pzero--notapad)

HTML

<a href="/listings/pzero--notapad"><img src="/api/listings/pzero--notapad/badge.svg" alt="findsafeskills safety rating" /></a>

Install

i

What was scanned

The files the safety scan read, as written by the repository's author and shown as plain text. Lines with a finding are marked.

README.md · README · 148 lines
  1. <div align="center">
  2. # notªpad
  3. **A DIY wearable AI voice recorder: a resin monolith you wear around your neck. It records your day and leaves transcription and note-taking to the AI of your choice, through an open MCP server.**
  4. [![Status: v0.1 design](https://img.shields.io/badge/status-v0.1%20in%20design-orange)](#status-and-roadmap)
  5. [![Hardware: nRF52840](https://img.shields.io/badge/MCU-nRF52840-blue)](#electronics-v01)
  6. [![License: to be decided](https://img.shields.io/badge/license-to%20be%20decided-lightgrey)](#license)
  7. [![Live presentation](https://img.shields.io/badge/presentation-GitHub%20Pages-2ea44f)](https://pzero.github.io/notapad/)
  8. [![The notªpad monolith](render/monolite_hero.png)](https://pzero.github.io/notapad/)
  9. ### [▶ Live animated presentation](https://pzero.github.io/notapad/)
  10. </div>
  11. ## Contents
  12. - [Overview](#overview)
  13. - [The object](#the-object)
  14. - [Architecture](#architecture)
  15. - [Electronics v0.1](#electronics-v01)
  16. - [Manufacturing](#manufacturing)
  17. - [Status and roadmap](#status-and-roadmap)
  18. - [Project history](#project-history)
  19. - [Repository layout](#repository-layout)
  20. - [Contributing](#contributing)
  21. - [License](#license)
  22. - [Authors](#authors)
  23. ## Overview
  24. notªpad is a wearable recorder in the spirit of Plaud and Omi, but open. It records all day, syncs over Bluetooth LE with a phone, and hands the audio to an **open MCP server**: transcription, summaries and note organisation are done by the AI the user picks, not by a closed service.
  25. Design goals:
  26. - **Own your data.** Audio and notes stay with the user; the AI is a replaceable component.
  27. - **No screen, no app to open.** Interaction is a squeeze gesture, three LEDs and a vibration motor.
  28. - **Buildable by a small team.** Off-the-shelf parts (an Ebyte E73 nRF52840 module), a 4-layer board assembled by JLCPCB, a resin shell cast in a silicone mould.
  29. > Honest status: this is a design in progress. Nothing has been manufactured or tested yet. Figures such as runtime and capacity are estimates.
  30. ## The object
  31. | | |
  32. |---|---|
  33. | Size | about 41 × 17.5 × 8 mm (fallback 9 mm; thickness may grow 1 to 2 mm for a larger battery), cast resin |
  34. | Attachment | steel ring cast in with a bushing, so it cannot come off |
  35. | Controls | touch sensors on **both** sides (metal strips as electrodes); a touch counts only when both are active (the "squeeze" gesture), to avoid accidental triggers from the chest |
  36. | Signalling | 3 RGB LEDs behind a 10 mm front slit, vibration motor |
  37. | Audio | 2 PDM microphones: one on the front face, one on the top face next to the ring (via a small channel) |
  38. | Contacts | 4 exposed gold contacts on the back: 5V, GND (charging), SWDIO, SWCLK (firmware over cable in v0.1, later also OTA over BLE). They are also a deliberate aesthetic feature. Pogo pins live in the dock, not on the monolith |
  39. | Back | Side | Finish options |
  40. |---|---|---|
  41. | ![Back](render/monolite_back.png) | ![Side](render/monolite_side.png) | ![Variants](render/monolite_varianti.jpg) |
  42. ## Architecture
  43. ```mermaid
  44. flowchart LR
  45. MIC[2 PDM microphones] --> NRF[nRF52840<br/>LC3 2x24 kbit/s]
  46. TOUCH[Touch sensors A+B] --> NRF
  47. NRF --> NAND[(256 MB NAND)]
  48. NRF --> OUT[3 RGB LEDs + vibration]
  49. NRF <-->|BLE| APP[Phone app]
  50. APP --> MCP[Open MCP server]
  51. MCP --> AI[AI of the user's choice<br/>transcription and notes]
  52. ```
  53. The app and the MCP server are not started yet (see the roadmap).
  54. ## Electronics v0.1
  55. - **Module:** Ebyte E73-2G4M08S1C (nRF52840), wire antenna at the board edge with keep-out.
  56. - **Storage:** W25N02KV QSPI NAND, 256 MB (about 10 to 11 h of stereo LC3 audio).
  57. - **Microphones:** 2x MSM261DGT003 (top-port PDM), stereo on a single data line (L/R pin tied low on one, high on the other).
  58. - **Power:** ~60 mAh LiPo with protection circuit, MCP73831 charger at 50 mA, 3.3 V LDO, and a P-MOSFET latch that disconnects everything when the battery reaches 3.50 V (idle draw below ~5 uA). The 5V contact re-arms the latch and resets the MCU ("reset by putting it on charge"). A watchdog is always on.
  59. - **Board:** 16.5 x 38 mm, 4 layers, 1.0 mm, ENIG or lead-free HASL (to be fixed at order), components on the top side only. Stackup: F.Cu signals, In1 continuous GND, In2 signals and power, B.Cu signals and GND; antenna keep-out on all layers. Zones: A (0-7 mm: pins, microphone, charger, latch), B (7-20 mm: LEDs, touch ICs, LDO, passives), C (20-38 mm: E73 module and antenna). The motor and battery sit under the board.
  60. - **Battery:** the 60 mAh figure is for the cell planned so far. A 502025 cell does not fit; a 501520 (5 x 15 x 20 mm, roughly 80 to 100 mAh, estimate) is the candidate, still to be confirmed.
  61. - **Estimated consumption:** about 4.6 mA average, about 11.5 h on 60 mAh.
  62. ### What changed during design review (21 Nov 2026)
  63. - **Pinout redone.** The E73 does not expose P0.11, P0.14, P0.16, P0.19, P0.21, P0.23, P0.25, P0.27 and P1.01, which the first pinout used. The new assignment is in [`docs/pinout_v0.1.md`](docs/pinout_v0.1.md); the 32 kHz crystal is dropped (firmware uses the internal LFRC).
  64. - **Microphones replaced.** The first choice (LMD3526B261) is bottom-port; the MSM261DGT003 is top-port and in stock at JLCPCB.
  65. - **Space savings.** One resistor per LED on the common anode instead of one per colour (LEDs multiplexed, one colour at a time); an extra 1 uF capacitor on the latch so a reset at low battery does not power the device off.
  66. - **Board closed on 4 layers.** With 2 layers 7 connections stayed open; JLCPCB Economic assembly does not accept 4 layers at 0.8 mm, so the board is 1.0 mm. Length fixed at 38 mm (at 35 mm 4 connections stayed open). Checks: ERC 0, DRC 0 violations, 0 unconnected, schematic-board parity 0.
  67. - **Charger changed to MCP73831** (50 mA), the same part as a sister project, so one extra-fee component is shared in a combined panel.
  68. - **Manufacturing route fixed (late 21 Nov).** JLCPCB only. The XIAO carrier variant costs more than the E73 module, is 17.5 mm wide (as wide as the monolith) and has 13 GPIOs against about 20 needed; home assembly dropped (no hot plate or paste), so JLCPCB assembles every board. No distributor beats LCSC/JLCPCB for the key chips, and a Basic-parts-only board is impossible (no BLE, NAND, PDM microphones, RGB LEDs or touch ICs in that library); 7 extra-fee parts stay. Q2 stays a dual 2N7002DW; NAND and charger stay extra-fee parts.
  69. - **Parts review.** E73 variant with only an external-antenna socket rejected; the 256 MB NAND confirmed after comparing alternatives; microphones rotated by 180 degrees in the JLCPCB placement file (checked in their preview). A NextPCB variant was prepared and dropped for v0 (no microphone stock, higher quote).
  70. - **Charger stays on the monolith** (not in the dock): unpowered contacts outside the dock, CHRG signal available, full 4.2 V charge.
  71. Documents: pinout in [`docs/pinout_v0.1.md`](docs/pinout_v0.1.md); bill of materials and netlist in [`jlc/`](jlc/); KiCad project and generators in [`kicad/`](kicad/).
  72. ![Routing preview, one panel per layer](kicad/sbroglio.png)
  73. ## Manufacturing
  74. - **PCB and assembly (v0):** JLCPCB only. Economic PCBA, 4 layers, 1.0 mm, 5 bare boards, 2 assembled; quote 97 EUR for the 2 assembled boards, shipped (estimate until the order is placed). The E73 module was out of stock, so 2 units are pre-ordered into the JLCPCB warehouse; the board order follows their arrival. Production files are generated by script in [`kicad/fab_out/`](kicad/fab_out/).
  75. - **Later batches:** also assembled by JLCPCB (home assembly dropped: no hot plate or paste). Component cost is estimated at about 19 USD per monolith, mostly NAND and module.
  76. - **First programming:** SWD from a Raspberry Pi with OpenOCD (or a Pico debugprobe); the nRF52840 has no ROM bootloader, so the first bootloader goes in over SWD, then updates are OTA over BLE.
  77. - **Shell v0.1:** two SLA half-shells (JLC3DP) filled with low-exotherm epoxy, since JLC does not cast around electronics.
  78. - **Final shell:** SLA master, silicone mould, fully cast pigmented resin.
  79. ## Status and roadmap
  80. **Done**
  81. - Concept, finish renders, animated presentation, BOM and netlist for v0.1.
  82. - Datasheet checks (E73 pinout, microphone port) and the resulting corrections above.
  83. - v0.1 board closed in KiCad: 4 layers, 1.0 mm, 16.5 x 38 mm; ERC 0, DRC 0, no unconnected nets.
  84. - Production files for JLCPCB, PCBWay and ALLPCB in `kicad/fab_out/`.
  85. - Charger changed to MCP73831; E73 socket-only variant rejected; NAND confirmed; purchase plan drafted.
  86. - Manufacturing route fixed: JLCPCB only, quote 97 EUR for 2 fully assembled and shipped boards (Economic PCBA, 5 bare boards, 2 assembled). Alternatives dropped: PCBWay, ALLPCB, NextPCB, a Seeed XIAO carrier variant and home assembly.
  87. **In progress**
  88. - Waiting for the E73 module: it was out of stock at JLCPCB, so 2 units were pre-ordered through its parts manager to sit in the JLCPCB warehouse. The board order is placed once they arrive (a Black Friday coupon runs until 2 December; timing is not a promise).
  89. - Parts outside JLCPCB: shopping list in `acquisti/spesa_amazon.md` (501520 LiPo candidate, roughly 80 to 100 mAh, an estimate; 0820 coin vibration motor; small epoxy kit; optional SWD probe and magnetic pogo connector), estimated 40 to 60 EUR; whole v0 about 140 to 170 EUR (estimates).
  90. **Next**
  91. 1. Buy battery, motor and resin; design the two SLA half-shells for JLC3DP.
  92. 2. Bring-up when the boards arrive: power rails, SWD, LEDs, microphones, NAND and touch.
  93. 3. Build the charging base.
  94. **On hold by choice (restart after the board)**
  95. - Firmware on a XIAO nRF52840 (same chip): recording, LC3, NAND, BLE sync.
  96. - Phone app (proposal: Flutter, Android first) and the MCP server.
  97. Working notes (in Italian): [`docs/STATO.md`](docs/STATO.md), [`docs/DECISIONI.md`](docs/DECISIONI.md), [`docs/DOMANDE-APERTE.md`](docs/DOMANDE-APERTE.md).
  98. ## Project history
  99. Latest milestones (full timeline on the [presentation page](https://pzero.github.io/notapad/#history)), all on 21 Nov 2026:
  100. 1. Manufacturing route fixed: JLCPCB only, 97 EUR quoted for 2 assembled boards; E73 module pre-ordered into the JLCPCB warehouse; shopping list for outside parts.
  101. 2. [Purchasing plan, production files and public docs update added](https://github.com/PZero/notapad/commit/e134c4fe3421e4ed552cf2a572049745e943e3e5).
  102. 3. [Microphone stock issue noted, part verified on its datasheet](https://github.com/PZero/notapad/commit/ab7805fa6c689fa76aa890e7f2c9aea123181f45).
  103. 4. [E73 socket-only variant rejected, module stock issue noted](https://github.com/PZero/notapad/commit/082cf999c373edec3fcccc1b11ad9b18bd77741e).
  104. 5. [Board v0.1 moved to 4 layers and closed, production files added](https://github.com/PZero/notapad/commit/9f1f8bed521b04b1bb8905c710e02cd58c6ed17a).
  105. ## Repository layout
  106. | Path | Contents |
  107. |---|---|
  108. | `docs/` | project state, decisions, open questions, pinout (working documents, in Italian) |
  109. | `jlc/` | bill of materials, netlist, board outline DXF, generator script |
  110. | `kicad/` | KiCad project, LCSC-derived library, generation and routing scripts |
  111. | `render/` | monolith renders and the script that makes them |
  112. | `pagina/` | animated presentation (three.js), published on GitHub Pages |
  113. | `.claude/` | project agents and commands used to keep documents in sync |
  114. | `CHANGELOG.md` | change history |
  115. ## Contributing
  116. Issues and ideas are welcome, especially on the electronics review, enclosure casting and the MCP server design. Please open an issue before a large change. Working documents are in Italian; the README, presentation and changelog are in English.
  117. ## License
  118. To be decided. Until a license is added, all rights are reserved by the authors.
  119. ## Authors
  120. Two friends, as a hobby project.

Ratings and comments

Sign in to rate this skill.

Sign in

Free to use. If it’s helped, pass it on.